Search results

Gents, I have my 1986 ex mod 90 back in the States now and need to order wide angle propshafts (front and rear) due to some vibration after I installed a new suspension with a 2 inch lift (+ correction castor and trailing arms). I was searching the sight and found some good info on suppliers...

Hey all, I just wanted to get a recomendation on a good set of standard height springs for a B reg Land Rover 90. I like the height and didnt want a lift but the springs are very rusty and getting close to the end of their life. I have been looking for a good qualiy set but all I can seem...

Hey all, I just bought Lightweight and the chassis number starts LLBAH on the plate inside the cab next to the wheel as well as in the engine compartment. The numbers on the v5 match these as well. I have just read that all vin or chassis numbers were supposed to start with SAL. Is this...

Afternoon all I have an odd one for you. I have a 200TDi that came out of a Disco in my 1986 C reg 90. I bought it because my 2.5 was burning oil and at the end of its life. I wanted to get something with a bit more power so decided on the 200TDi. In the next year I am going to be sending my...

Hey all, If the end of the world does not come today then I need to start thinking of my New Years resolution. Besides trying to be a better person which never seems to work out I need to put some reachable goals out there. The # 1 project I have right now is my 1988 LR 90 rebuild. I need...

Hi all, I know this is strange to ask about a soft top when the weather is begining to turn but here goes. I have an ex MOD 90 that originaly had a soft top (has the large roll bar hole in the capping just behind the tub bulkhead). I have the roll bar and a rear hoop but I need the front...

Hey all, I did a search and could not find the answer I was looking for. I have an EX MOD 90 with the ali sliding front windows. I need to replace the channel at the top of one of my doors as the glass wants to tip forward/backward when I try and open it. I will probably replace the bottom...

Hey all, I woke up this morning to find an empty space in my drive. Between 1200 last night and 0630 this morning my Land Rover was stolen. It is a 1986 ex RAF, NATO green 90 with White standard LR wheels. It has the van sides and a rear swing away tyre carrier. The reg is C677FAH and was...

Hey all, I bought a set of wheel with tyres before doing my homework which seems to be my MO. I bought them because they are wolf wheels and I am putting them on an Ex RAF 90. The tyres that are on it are old military tube tyres and I want to replace them with tubeless tyres. I was doing...

Hey all, I always get great help from the Landyzone family and I need help with this one. I have an old Land Rover 90 that spent a good deal of it life in the RAF. It is nothing special but worth the world to me. I had great plans to put a TDI, rock sliders, new axles ect into it. About 6...

I looked at my status today and realised it said Member instead of Junior Member. Now I know how Penocchio felt when he became a real boy. Thanks for everything gents and any ladies of Landyzone. Looking forward to a great year with my Landy and you guys/gals. Doug

All, I live in Suffox and would like to go to a shop that sells Land Rover bits off the shelf. Most of the places I see are on line and I cant get a feel for quality, ect. Is there anywhere around that you can walk throught an isle and fill your basket with bits for your project? The...

Hey all, I was using the local pay and play this weekend and my Landy spent some time in the water/mud. Now she is making what sounds to me like a brake noise (sticking/draging) when I turn to the right. The noise increases/decreases with road speed. When I apply brakes it goes away. I dont...

All, I took my 90 out to the local pay n play this weekend after some long awaited rain. As a beginner i shortly found myself in the deep mud and had to be pulled out. I knew my landy was tough but I am so proud and happy with her. Once I checked the oil to make sure she was good I started...

I have a rolling chassis with motor and trans that I will need rid of soon. I bought it as a parts car and took the good bits off. I have a V5 but I reciently made it SORN as the tax was coming due. There is also no MOT on the vehicle. My questions is, should I sell it with the V5 or should...

Hey all, I have a 1985 B reg Land rover 90. The front has a 110 sticker and the tub has galvanised end caps. The fenders seem to be newer because they have the side markers. The bulkhead seems very new (zero rust). The front wind screen is also not the fold down type lik my 1986 (c reg)...

Good morning all, I have a set of near new axles off a newer defender (with ABS). Can I just swap them for the axles that are under my 1985 Land Rover 90 and just disconnect the ABS line or will I need to replace or modify the caliper. It looks like plug and play for the most part but I...

All, I just bought some replacement hard top side panels with windows. They are in good condition minus the side panel to tub seal (thick spongy seal). Does anyone know where I can find this part (both sides)? Also do I need anything for the hard top to windscreen. From the outside I can...

Afternoon everyone, I am in the need of a new (another) steering box but I think I might have the wrong one currently. I have the 3 bolt version with the three bolts in a triangle pattern and one bolt in the middle. The ones I have been looking at on ebay call it a range rover steering box...

I just wanted to say thanks to everyone for helping me learn more about my Land Rover. The folks here are awesome and dont care that I am a FNG to the scene. I think Busters write ups are great, I used his wead sprayer pump idea to change the ATF fluid and it worked a treat. I have to do the...