Search results

Thanks. Mackenzie

Thanks for the reply James what should the rod adjustment be. Mackenzie

Need some help with my 2001 Defender TD5. When changing through the gears it feels like all gears are slightly catching. Wonder if anyone had any idea what it could be. Have bled the clutch pedal but no difference, pedal feels fine, no slipping, when finished bleeding had to lift the pedal...

Mine is called CLAUDE dont ask!!!

Had a similar problem with mine and it turned out to be the Mass Air Flow sensor. Located just off the airfilter box. They seem to have a habit of giving up after a period of time. Most chaps on here will tell you to avoid after market MAF sensors due to poor quality. OE ones cost up to £70...

looks better without the bread basket on top.....

Feel much better now, they had me worried for a bit!! mackenzie:)

Just read an article in the December issue of LRO mag and they make reference to two changes that will affect the majority of us boys. 1 Blanked off EGR will be a fail 2 Remapping will be a fail Come into effect Jan 2012 Thats me stuffed on both counts!!! anyone got a plan...

Hi just fitted some new seals on mine. First remove the two 8mm bolts on the underside this will allow the flap to free from the cab lever. Then spay WD40 on the hinge pin 2 on each flap. Only unscrew 1 nut then the pin will move enough to allow the flap to release. When putting back lubricate...

Very interested to see the pics and different stages of work. But most interested in your opinion on the gearing. Alot of talk has it that you lose a lot of low torqe.

Hi, Mike did mine at the same time i blanked the EGR removed the mid silencer the difference is incredible. The extra demand for air through the engine caused my intercooler rubber pipe to collapse, bought a new heavy duty one from LR dealer. Changed up to 235/85r16 tyres and gearing is well...

I have just fitted some new carling switches to my Landy. Can anyone confirm that because these are American switches they operate in reverse to our switches, ie; press UP for on we would normally switch down for on. Any help would be appreciated, I have spoke to MUDSTUFF where I purchased...

Like the idea of swinging the door then catching it, the other requires spanner things... thanks for the replys mackenzie

Thanks for that... goes without saying Defenders are good at collecting water where you dont need it..

Can anyone explain why water collects in the recess of the door handel recess. Should there be a drain point? please advise thanks

Hi, mine had a collapsed intercooler hose, looked fine from the outside but not so good inside. new hoses are much stronger and robust. good luck. mackenzie..

Hi, agree with last comment mine was collapsed intercooler hose only collapsed when engine under pressure. regards.

Thanks for the info, its doing my head in also.

Any Ideas on: how to stop the clutch pedal spring from squeaking....

Hi, mine went from 24mpg to 29mpg and felt better to drive. just do it...