Search results

i don't follow? what do you mean wrong thread?

yesterday a Tit in a car decided to reverse using "the force" instead of a mirror. he ****ted my rear passenger door busting the wheel arch plastic trim. i was wondering if anyone out there has a spare OSR door plastic wheel arch trim for sale. mine is a 2001 TD4, 5 door. i live in hope?

I drilled a 12mm hole in N/S of box from bottom into cubby, it lets water out but does not stop it getting wet. i am convinced that a shield is needed between exhaust and floor, but i do admit to liking a wet box from time to time.

hi, we were talking about the Differential bushes, the diff is held by three brackets, each has a rubber bush, the bush on the front of the diff is notorious for failing. the one you are thinking is the IRD shaft seal, do a search on here for IRD and you will find info. good luck.

Cheers Musky81, wipers all sorted thanks to your help. top bloke!

after reading your post, i went and had a go, took bolts out of front bush, r/h/s bush and bottom bolt from l/h/s bush. diff now swings about held in only by one bolt in l/h/s bush. shoved propshaft and diff over to l/h/s and the bush came out as you described. easy 20 mins. Getting the new one...

have sent you details in PM hope to hear from you soon.

cheers musky, mine is a 2001 on a x plate with the square shaped connector, not the long one.

yes, i will have to bite the bullet and buy new £140 and me scottish, not gong down well.

here is pic of dodgy looking item, mechanically it fits, but wires and plug are completely different.

will post a photo soon , guy from fleabay gave me a full refund but is sure it is a landy part.

I have a knackered wiper motor, does not park wipers, i drilled out the rivets on the motor, found that the park connectors were burned out and the plastic park area of the copper ring if all worn out. I bought what was described as a freelander wiper motor off fleabay, it arrived but is a...

I have a knackered wiper motor, does not park wipers, i drilled out the rivets on the motor, found that the park connectors were burned out and the plastic park area of the copper ring if all worn out. I bought what was described as a freelander wiper motor off fleabay, it arrived but is a...

what is a synergy vp? and how do you fit?

Hi, i have a 2001 td4, 120,000 miles. i use it to travel between scotland and wales. other than a dodgy fuel pump I have had no problems. and on the motorway it returns 40-45mpg easy. the vcu and ird were replaced at 100,00 if this helps.:monitor_punch:

when it does not start, turn on ignition and listen for gurgling sounds(passenger side) or from lift pump under bonnet on passenger side wing. if it is there then in tank fuel pump is on way out. worth a try.

right, yooz have lost me now lol.:eek:

:doh: no wonder children don't want to act adults!! Surely this site was set up to help people with landrovers. So far i have seen a lot of people with a lot of experience offering help to others. but you do have your fair share of abusive knuckle scraping illiterate ****ers on here too. Fookin...

you need to be rich to run a P38!! Too many computers

there are no special tools needed, a good socket set will do the job. you could leave the front, then you don't need to blank off the IRD.:welcome2: google Bell engineering, there is an explaination on there how to check IRD VCU etc.. cos i hate typing.