Search results

Started the proccess of refitting all the dash back today as some final parts of the rebuild So I connected the cables back on the ignition switch and connected the rest of the clocks in and went to turn the ignition to try and start the landrover and heard a relay click then lost all power to...

Hi I've got a 200tdi defender but have used 300tdi wings with the intake point on the drivers side wing has anyone routed and sort of pipework from there to the filter box before? struggling with seeing a neat way around it

Hi Has anyone fitted hid headlights using the arb loom and relay kit? Looking for tips on where people have mounted the realys and fuse provided Thanks

Been rebuilding a defender 90 for the past 2 years coming upto the third year in august but hopefully finished by then and finally feel like im making progress towards completion so thought i would post some pictures

Hello guys I've just brought a new stainless exhaust for a defender 90 200tdi and come to fit it and I am missing the exhaust bracket on the chassis ( the one after the gearbox bracket) I've looked on the Internet and craddocks want £50 I've also looked on yrm and they don't make that exact...

Have fitted new shocks to a defender 90 and was wondering how you guys hold the shock so it doesn't spin when tightening to the required talk settings? Have looked at oil filter ratchets but they all seem to be chains and don't want to damage the shock Thanks

Hi all this might sound like a stupid question but when refitting the rear calipers does it matter which side of the vehicle each caliper goes I.e. bleed screw at top or bottom? Thanks

0-999-63 10M roll 13 core automotive electric cable Would anyone be able to tell me if this cable would be ok for making a chassis harness for my defender 90 200tdi cant seem to find one already made up was going to make one my self the existing cable is 13 core but theres are different...

Been rebuilding my Defender 90 200tdi on a richards galvanized chassis Attached the front radius arms and it had made the diff sit at a very steep angle also making the spring cups lean forward could this just be down to having not weight on the front with the engine and gearbox being out?

hi everyone i have been to craddocks today after the gearbox brachets (part number NRC5742 and NRC5743) for a defender 90 with an lt77 gearbox as have finally started a rebuild of a galv chassis but have been told they do not stock the items and a further look on the internet says they have...

Hi Does anyone know where i can get the fuel tank mounting bracket from? Part number NRC9474 Tried craddocks and they said the only way they can get one is from land rover and its going to cost about 60odd quid and really dont want to pay that for a small bracket thanks

Hi just looking for some advice Ive changed the oil seal and metal spacer on each axle / brake and changed the pads all round as they were all oil soaked. Found the drums a bit tight to replace even with the adjuster on its lowest setting and the drums are getting very hot all round and can...

snapped the head off one of the long bolts that hold the water pump on, managed to get cambelt cover off still but has anyone got any tips on removing the pin without drilling it out, i have tried mole grips but pin felt a bit weak

what is the best way to remove the original landrover bushes they really dont want to budge was thinking about burning them out but not too sure advice please?

Does anyone know what size gap i should have when setting up the points on a 2.25 petrol? all help appreciated thanks

After some searching picked up a 90 to start a project 200 tdi soft top with 60,000 miles must say im rather pleased :)