Search results

Hello Boys and Girls, Missed you lot and the my old tub! So not sure if you followed but at beginning of this year I finished series 3 with TVR engine conversion with I reconned had about 300BHP (before supercharger.... god only knows how much with)..... ...Results where eemmmmmm...

Just in the process of installing EFI.... ...Its running like a bag of nails idle hunts and is slow to pick up... ...Just removed plugs and they are really really soothed up. Any ideas what would cause this? Check spark and it looks ok..

Just trying to work out effect on Fuel pressure regulator (FPR) by not connecting the vacuum... I have it set @ 40PSI with no vacuum.... ...Thing is as I suck on vacuum pipe regulator drops pressure to about 30 PSI. What I cannot get my head around is I though the 14CUX need approx 40PSI...

Can I run 4.3 on 3.9 tune resistor? And what would happen if I was to try and start engine without one. Thanks again!

Been on V8 Mate quite a bit, but I don't think I have ever posted pictures/movies of my Series 3.... .....Its with a 4.3 TVR - Thats been tuned pretty heavily! Here are a few movies etc: http://www.landyzone.co.uk/lz/f6/side-pipe-neighbours-hate-me-163644.html

Thinking of parting company with landy, Chassis is welded painted etc New bulkhead Resprayed New g/box New sailsbury 3.54 from stage 1 New front axel from military lens And a newly built tvr 4.3 from v8 developments to stage 3 New springs from gb Recon front panel New dash panel...

Hi all i am looking to mount throttle body on a supercharger. So I was wondering if the the on a series 2 disco is separate to the plenum....if so any pictures?

The inlet manifold is sitting a little high and covering the bolt holes, Can anyone tell me how much I should machine off the bottom of the manifold to make it sit down about quarter of a hole lower....? There is a rule for this - someone told me about 8 months ago and when I machined it...

As the title says...... If not what do I need to change.....

Looking to try and seperate throttle body assembly from plemun cover, anyone got any smart idea's? MX

Is the AMF made reduntant when using Megasquirt? MX

I am buildind a 3.5 as I have loads of spares from 4.3 rebuild. It's got stage 2 heads and a janspeed kit which is complete!!!! Turbo has about a mill of play in shaft but when full of oil the play moves veeeeeeeery slowly...... I figured that when pressurized oil is in bearings it would be...

Ok go the bulk firing, next on the list is the "purge" line.... ...Talking to a gent the other day who mention that there is a line with a charcol filter from the tank....? Any ideas? MX

When I rebuilt my S3 last year I took off a overdrive unit (fairy). It looked in pretty good shape. I removed it due to me running a stage 1 rear axle and RR diff. My thought process was stronger drivetrain overall. My S3 has a lot more power than standard, and so far gearbox is taking it...

I'm confused.com. How Does a Hotwire System time itself with out a crank position sensor? Bulk injector firing? If so someone explain this to me.... Max

Land Rover Zone - pornstarmax's Album: Supercharger - Picture Anyone had any experiance with these.... ...Got this as it seemed a smart idea at the time, ..Still seems a good idea, however I havent started yet.....

Land Rover Zone - pornstarmax's Album: Supercharger - Picture I'll be beggered if I can insert an image... ...Eitherway, help on this winter project would be welcome. ..First question is on butterfly valve on inlet, I was thinking on running 2 cables 1 to carb, 2nd to butterfly valve on...

Been thinking of next project... ...Engine running pretty well, but I figured a little more torque, might be interesting. Figured on a relitivly small turbo, Weber 500 in "a box" comp ratio reduced to 9:1 (from just over 10:1) intercooler, oil cooler. Run it a little rich, 5-6PSI off...

Hi all, I am running roller rockers with Chevy type push rods. I want to open the guide holes out from the 13mm holes now to about 18 this will mean going into the input ports by 2.5mm. Anyone have any experiance of this?

Soundtrack: SDC14235.MP4 - YouTube Side pipe finished, will post a few pictures shortly