Search results

it is a bodge! waste of money.

blend motors are the same you can buy individuals new from island 4x4

you do gain from it! smoother running at idle plus better engine life from no sooty exhaust gasses entering the oil! plus have you seen the intake manifold on most egr equipped diesels caked up inside with thick deposits? if we all cant agree on performance gain can we agree its a good idea in...

may help if you look at the new ball joint as the old one will be covered in crap! on the new one pay paticular attention to the end where the nut is all will become clear then!

unknown b is for a cable as in the poverty spec dt which do not have ac have cables to operate the flaps not blend motors but all heater boxes are the same so whether it is a base model dt with manual cable operated controls or dse with hevac and blend motors the heater box is the same

no it does not come off and dont try!!!! the tapered part with the thread that you put the nut on has the allen key hole to stop it spinning and you have to use a spanner to do the nut up as you cant use a socket on the nut else you cant get to the allen key hole

the research i have done so far seems to be the americans are more into making black diesel than over here seems the cummins power stroke diesel engine will run on just about anything! from what i gleaned from the net was filter down to one micron after removing water and antifreeze and mix...

in the center of the ball joint there should be an allen key hole that you put an allen key in then tighten the nut

i need no sympathy iam quite happy thank you perhaps the oil where you are is easier to get hold of but around me things are sewn up tighter than a worms chuff! and as i said i can buy bio for 80p a litre so i have no need to make it anymore i was purely curious on how to make black diesel and...

easy tiger! my dse is standard apart from a chip have no interest in blowing it up. the reason i gave up and if you made bio you would know that a chippys use palm oil which is useless unless the temp is above 10 degrees else it goes solid and b 99 percent of restaurants pubs etc are...

after giving up making bio diesel due to the cost of veg oil have been looking into black diesel do you make it yourself?

they are vastly improved now with the rather expensive but much needed bosch metering heads that are available!

was a pile of rust when i got it! on my 4th one now that iam restoring finished one side of the body part way through the other side. more of a tr6 man myself prob as they are more in my price range! tr5 lovely if you got £25000! didnt someone on here fit a 24 gearbox in a diesel used the...

i dont play these days well not much! thats why i have spitfires not very fast but feels fast cant get into any trouble that way!

i did say my old sleeper! 2 kids etc she is long gone and it was very reliable still run rovers ( diesel that is ) as they are cheap and very reliable and the 45 or 400 is a honda civic in disguise!

not at all my old sleeper of a rover 25 diesel rolling roaded at 158 bhp with custom remap! different injectors all of the above mods i listed for the p38! no books trial and error to see what works and what didnt. plus i like a good discussion once in a while!!!!!!!!!!!!!!!!!

thing is kinda missing the point agree 197bhp upgrade on an old engine isnt the best idea prob will blow up, but some people like to modify things to see what they can get out of it same as a 1000bhp toyota supra is it reliable nope! but it is a hobby i like restoring triumph spitfires some...

the first thing i said is decat then egr delete which reduces back pressure. gates valve stops waste gate creep so no loss of boost as the actuator starts to open at lower boost pressures, untill the valve opens at set pressure. all help spool quicker and engine more reponsive. so if you remove...

ves sport scottish company sell them on ebay £120 it is solder in, but you solder in the holder then fit the chip so if you want you can revert to the original chip. no need to destroy anything just need a solder sucker and a steady hand!

fair point but with higher boost pressures a must, i beleave thats what jeremy fearn does as part of his conversion