Search results

I have a rear load cover off my 95 Discovery 1 here for anyone who would like to collect it. I don't want anything for it. It is light brown, needs a good clean but it works. The plastic capping on one end is broken but that doesn't affect the operation of it, see photo. I am in Havant near...

Rotary connector from steering wheel please? If it has airbags.

Latest update. Finally got a working throttle pot and Hey Presto! everything was alright for a short time. Down pipes now needs replacing, sounds like a tractor!! Did some searching for a replacement, quotes from £164 to £445:eek:. Guess which one I'm going for. Now where did I put my...

Update. I haven't had time to do anything until today. I decided to do a thorough job so I thought might as well give the Plenum a good clean, as I disconnected the TPS notice that one of the wires coming from it was broken right inside. It was just stuffed in!! That's Britpart for you- you...

Turn the key, it starts first time. Idles at around 6-700rpm with no problems at all. Pulls away fine and then starts to lurch at about 25-30mph. It's as thoughthe fuel is being momentarily shut off and on. If i lift off it will even out again and I can cruise at 30 with no problems. A little...

Thanks for quick replies I've got one from Paddocks. I've gone down the Britpart route:eek: because a genuine one is worth as much as the Disco.

Throttle position sensor (Potentiometer) for 1995 3.9 V8 Discovery.

I need to replace my throttle position sensor. The part no shown on it is Lucas 84925A for a 213SA ECU. As you can see from the piccy it has two screw holes. Every other one I can find (including on Microcat) has elongated holes so it can be adjusted. It is for a MY95 3.9 Disco. Can anybody...

I had the same problem when I got mine. I saw a relatively bad hole there and poked around and found a bigger hole:(. I had both sides done by a local mobile welder for £150 which I thought was a good price so £80 is a bargain by my reckoning.

The unit is only live when the ignition is on. Check the wiring from the switch forward, you may have a short.

Which fob have you got? If it is the 2 button you've got a "spider", 1 button fob no "spider"

http://vromos.com/en/categories_show.php?CategoryID=15 For what it's worth. Haven't we been through this before?

See if you can find a driver's door lock and key at a scrappy. If you're not bothered about having two keys that would fix it.

Sidewaysste and TheBigLad: How dare you suggest I could be so stupid. I've owned a number of landies, I'd never do that!!!! And if I find the idiot who didn't put the lever back properly there will be serious trouble.:o:o:o:o:o. Thanks for reminding me to check the simple things first! I...

Will do as soon as it is dry enough here. Thanks

Fixed one problem and another rears it's ugly head:( I have no drive from my auto box. Nothing happens if I put it into any gear. If I put it into park I get a sort of clicking noise as I select it, it stops as soon as it is in park. I have checked the atf after going through the gears with...

Update. Checked replacement starter with jump leads and shorting across to solenoid, it worked. It turns out that the replacement had a smaller spade connector from the ignition so it worked loose when the starter turned over. New connection on lead and all is well. I rechecked the old...

The driver's door actuator is the master for the system. Take the door card off and see what happens when you drop the window, it will be fouling one of the rods which is presumably loose or the actuator itself is loose. Shuttng the door hard will rattle the rod/actuator which will have the same...

Battery has been checked- all ok. When I turn the key there isn't any click or clunk you would expect with a weak battery, the lights don't dim etc thereis just nothing. I am giving myself a few days off next week and shall take it apart again, give everything a good clean and make sure all...

Is it likely that I still have dodgy connections? The "new" starter turned fine just after fitting and then 15 mins later was turning lazier and stopped while cranking. I am going to give everything another clean up asap and try using leads direct from battery with shorting to solenoid to...