Search results

thanks very much

hi its not got a ecu its got a plug for that can the ecu be brought by itself

hi guys I have just gone and brought a 05 plate vogue diesel lovely motor but still kept hold of the p38 (for now)the l322 was supplied with a witter towbar and wiring is all labled with l322 on it what I would like to know is where do I find the plugs for it? I have had the spare wheel cover...

and there me got rid of mine about 6 months ago and im after another one at mo keep looking and ecen the wife and my parents said they knew i would end up getting another lol

a few weeks ago i said a goodbye to 1 of my range rover dse:( and then yesterday i got rid of my other p38 dse:( yes it was sad to see both of them gone but i just wasnt using them and when i did want to use either of them i had to charge them up /jump start them and was always worried they...

remove the boost hoses or take the headlight/battery box out of the way

make sure the tank is nearly empty when i did my 1st one it was just about full and i struggled keeping it steady bringing it down

are you after the sat nav in the boot or the display up front as gotone out of a 30th anniversary model

anti vibration pulley on the crank they break down and vibrate and rattle they also quieten out when the revs rise

hi i got a series 3 lightweight that has got the indicator stalk missing a few people have told me i can modify a standard 3 series stalk to fit does anyone know what i got to do to get it to fwork and fit cheers

apperently it was done back in 82 and that was what they had done but have got a whole lot of paperwork to go with it. all the chassis is ok and it had a new bulkhead about 4 years ago

hi guys im new to this side off landy zone normally on the range rover side but im about to buy a series 3 lightweight / air portable 88 with a 2 1/4 petrol engine, it is quite clean for the age but is missing a tailgate and a roof canvas and bars but they will come up sometime on fleabay etc...

you will need to get the wiring that runs from the becm to both seats and they are plug and play as for the heated side i cant help on that one asa mine already had heated seats but now everything else is electric instead of being manual

when i undid mine i had a breaker bar and socket on the crankshaft pushed it round the chassis then flicked the ignition on and off a few times and the power and shock of that undone it with no probs

any pics and how much would you like for it cheers

you can buy the seat loom off ebay and it is straight forward plug and play. on the becm side you uplug the heated seat wiring and plug it in there and bolt the earth lead down and then the other bits go under the seat and plug in and away you go. (just done it on mine)

the ball and hitch should be fine but you do need to isolate the suspension with the button by the switch on the dash otherwise when the suspension drops and raises it could throw the stabilty when the weight shifts

i have had the crank shaft damper pulley go twice 1st one sounded like the water pump impellor had come over and was rattling around and the 2nd one rattled on tick over and got quieter when you reved engine up so after the 2nd one went i welded the pulley up and been ok ever since, as for the...

found this on fleabay and the owner has done away with the standard eas and is now running a different set up looks like its using twin pumps 1995 LAND ROVER RANGE ROVER 2.5 DSE BLUE P38 DIESEL MANUAL | eBay

hi been out in my p38 diesel today and it started to make a funny noise so limped it home, had a quick look over it and think we have come to the conclusion it could be a tappit going/gone, on tick over it sounds like a top end rattle when the revs rise it disappears? so going to take the rocker...