Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. M

    P38A P38 Auto Box Selector Question

    OK I'll investigate further, it just pulls out of park in to reverse and then drive with no lock, any ideas where to start ive on built manuals before. Matt
  2. M

    P38A P38 Auto Box Selector Question

    I have just bought a 2002 Vogue SE 4.6. The auto box works fine but the selector can be moved without a foot on the brake or without pressing the lock button on the gear stick. Therefore the gears can be selected easily and freely but it should lock in position and only move when the button is...
  3. M

    Disco 4 HSE LUX & P38 Vogue SE

    Disco 4 HSE LUX & P38 Vogue SE
  4. M

    Fuel Tank Issues

    Right, job done, the old diaphragm had a two inch split in it and the rubber was very soft! So i can only assume from the condition that it has been like this for a while. I replaced the diaphragm which is as described "a bit fiddly" but we have no pressure in the fuel tank now, the turbo gives...
  5. M

    Ashtree Bulkhead

    When i was retoring my 90 i saw them at Bealieu, the quality of the bulkhead they were showing was poor, I know they are secondhand then repaired and then galvanised but it looked rough, so I bought a secondhand TD5 one and resprayed that one.
  6. M

    Fuel Tank Issues

    Replacing 2.5TD boost Diaphram - LR4x4 - The Land Rover Forum After some searching i found this and it seems to be exactly what we are getting so i am gonna give this a try.
  7. M

    Fuel Tank Issues

    Yeah i appreciate that both cant be the case but cant make sense of the fact that you can hear the tank banging as its sucked in and then splurts fuel if you take the valve out. Just hacked off that i want to get it to billing this year as i missed it by days last year and its not playing the...
  8. M

    Fuel Tank Issues

    Morning Everyone. I have been out shaking down the 90 after a full rebuild. The issue i have is that i have fitted a new vented non locking fuel cap to the tank and despite it being vented the tank bangs where it is holding a vacuum. Simple resolve was to remove the the vent valve assembly. The...
  9. M

    19J Wiring Diagram

    Okay guys Billing is a few weeks away and i am desperately trying to get the 90 build finished so i can take her up. Wiring is the issue. Everything is back in but there are so many connectors that don't seem to have a home and i can't get her to crank over, i have a new autosparks engine loom...
  10. M

    Clutch and wolf tailgate

    I have a 90 which we are building from the ground up, all new brakes have bled perfectly but the clutch with new slave is a pain as fluid is going through with no air bubbles but still no feel to the pedal, any ideas as we have put about a litre of fluid through now and there is no air bubbles...
  11. M

    Continuing problems Freelander 2!

    Have a 58 FL2 on its 3rd resevoir which alledgedy is the issue as the filter blocks and starves the pump, hence the noise. I have the original pump but 3 resevoirs. My business partner has a FL2 identical to mine (both 2.2 HST) and has had no issues. There are plenty of these issues if you...
  12. M

    90 transfer box issues and pto winch

    tHANKS FOR THE REPLIES BACK AT IT NEXT WEEK SO WILL LET YOU KNOW HOW I GET ON.
  13. M

    90 transfer box issues and pto winch

    I am rebuilding a 90 from the ground up and have the old problem of the transfer box not selecting low range through lack of use, is this an easy fix to get this sorted or is it a big job? I also have a superwinch PTO driven one as the electricity board use and have the matching bumper which i...
  14. M

    Chassis change

    Just done the same thing and found that using britpart cellular dynamics +2 lift fouled the terra firma turrets at the front, altho shocks are +2 the springs are std so should be okay so have opted for std turrets as the external tubes take up space and will see what happens when they arrive.
  15. M

    90 front discs replacement

    I need to change the discs on my 85 LR90. So far its not going well as three of the five hub bolts have sheared, is this the norm. I am doing a full rebuild so want to do discs and pads and i am considering a swivel service kit at the same time, how easy is the disc change, is there anything to...
  16. M

    90 Chassis Swap

    I AM DOING THE SAME AT THE MOMENT BUT NOTE A FEW POINTS. It will take more than a few weeks so prepare accordingly You will be amazed at how much space stuff takes up make sure you have room. Get the essentials in, turret rings, loads of nuts and bolts (use paddocks bolts kits) new set of...
  17. M

    2.5 N/A symptoms

    I had this last year, turned out two pistons were split, fitted a new set with rings, honed the bores, skimmed and tested the head and fitted new valve stem seals, like it has been said though this is all fairly simple big mecanno stuff and could be done in a few hours (except the head skimming)
  18. M

    Engine management fault

    There was an article in LRO recently stating that the main red plug once oil is in it requires replacing but once done sorts the issue.
  19. M

    To Correct or Not Correct That is the Question

    Hi all Still deep in the build of the 90, and have a question for you all. I am fitting a 2" lift using britpart yellow springs (2") and Britpart Cellular Dynamic Shocks, The front end had Terra Firma Tubular turrets fitted and it seems that the standard arms are at a slight angle now and...
  20. M

    Bulkhead replacement

    I am doing the same thing at the moment and would suggest you look at Paddocks (Paddock Spares - Land Rover, Range Rover Parts & Accessories - Discovery, Defender and Freelander) as they do bolt kits for most things, but before you put the new one in cure any rust, waxoil the inside where you...
Back
Top