Search results

hello my 90`s had a disco 200tdi fitted, its weaping fuel past the seal and the houseing at first thought it was the ****part filter then tried another still did swoped the spare i had still did it swoped the houseing still did it brought a decent make filter still does it, with the first 2...

Hi all noticed my master cylinder ware it bolts to the servo its damp, has any every used the paddocks seal kit or should i just swop the master cylinder for a new one thanks.

Hi wanted to change my drive belt and couldnt slacken the belt of all i could see was the 13mm bolt from under the idler pully thats loose and the pullys still solid the only other thing i could think of was the ring of 8mm bolts around the pully but didnt have owt at home to get to them so if...

Hi just done the clutch on my 1.8 gaylander :mad: and lost a load of oil from the gearbox, what oil do they have it smells like ep90 but wanted to check just in case other gear oils smell the same thanks.

Hi all gonna buy me a set of 235 85 special tracks with in the next couple of months and just wondering what kind of mileage people have had from them, just wondering if i decide to use it for my 50miles a week trip to work and back if it will chew them up .

hi all my clutch has gone on my 1999 1.8 freelander any one done one on there driveway, with the 4 wheel drive layout been the way it is and not having the ground clearance of my defender i was wondering if it would be easyer to release the engine pull it to the side and change it that way, what...

Hi should the lt77 have atf in and not ep like mine i know the r380`s do and thought these did, just wanting to double check thanks.

Hi all thinking of swoping my transfer for a disco one for the higher high box ratios, and have been told the low box ratios are the same from the defender to disco if thats right ill be swoping it thanks.

hi the end of the dumb iron with the rubber bung in it that sit under the bumper, are they used for any thing as mine are quite crusty and was thinking of cutting them off flush with the end of the chassis and plateing the ends up any objections?

Hi iv finaly got a 90 its a 1988 and what i want to know is do the very first 90`s have low ratio diffs like in series as i was talking to some one about swoping my rear axle for one with disk brakes and he was unsure if id need a diff for the front axle aswell, let me know thanks.

Hi dose the damper do any thing other than make it a swine to bleed any one ever bined it, also after endless bleeding and still only having half of a pedle would i be right at pointing my finger at my master cylinder thanks.

Hi iv had the flange of to change the prop bolts and be for there was no play in it and wasnt after but a week later iv now got play in it, dose any one know what the torque setting is for it, i couldnt find it in the haynes manual or on auto data so i just air gunned it back up, could i of not...

my mates not long brought a 1998 1.8 freelander and after taking it off road at the weekend to find out theres no rear wheel drive i got under neath to check that the props are still there, tryed turning it and was solid so theres nowt broke, now iv just read a recent post about a company...

Hi iv look but cant seem to find some sort of chart just to show me what size rims i need, iv got 265-75-16 tyres and want some modulars i think i need 16x8 is this right thanks.

Hi im after glasses

Hi will disco 2 seats fit into a disco 1 and does any one if the 3 door and 5 door front seats are the same apart from the bases they it looks to me like i could just unbolt the seats from the bases to swop them, thanks.

im on my second crankshaft oil seal with in a month the first dont think i fitted very well and it leaked alot straight away also britpart, the second was the better one from paddocks wich had grease in side so i greased up heavly and was a lot more carefull fitting and after about 2 weeks its...

Hi im in need of a rear 24 spline disco diff or i will take a full axle im at robbin hoods bay if any one no`s of any one near by can you please let me know thank you. pm me

mine was rotten past the putting a new pannle in so i cut it all out and used angle to make a new frame

Hi would i be right in thinking the bolt head in the center at the bottom of the back of the drum is to tighen it up. my hand brake leaver is on it last click thanks. on a r380 box.