Search results

Hi. I recently fitted a diff lock kit to my 2000 discovery. Once I had done it , the diff lock light would come up when it was engaged. It is now not coming up. But it is still engaging. Does anyone know if there a fuse for the light? Thanks Chris

Hi. I have just brought a second hand Southdown snorkel. Does any one know where I can get the cutting template from? Thanks

Hi. I have a discovery 2 with air suspension. Is there anyway to reset the system? I had to disconnect the battery and now it Wont go back up. I've tried raising it on the nanocom and it's doing nothing. I can hear the compressor trying to do something. The only other thing I've done is replaced...

Hi. Thought my second hand engine had done the headgasket after not even 100 miles after fitting it. There Was oil coming out from under one of the front head bolts and up beside the first glow plug. Also running very rough and smoking. Have stripped it down today . I have taken the head of and...

I have recently fitted a second hand engine to my discovery 1, And have now got a couple of issues. As far as I can see I have put all all wiring back where it should be but since it has been done I am having issues with the starter motor and the battery. I changed the starter for my spare one...

Hi. I am changing the bearing on the out put shaft on the transfer box. I Have undone the nut and removed the flange. There is then a seal which seems to be in 2 bits. Top half came out then there is another seal which sits in front of the circlip. My question is that should there be a mud...

Hi. Am in the the middle of fitting another 300 tdi to my discovery, and have noticed that the long threaded bolt isn't there that the tentioner slides on and you then put the nut on. Has it always been the same design or was it changed to a bolt at some point? that goes through the tentioner...

Can someone try to point me in the rite direction please.. got heavy steering when trying to park. No Singh of fluid leaking . The belt has slightly frayed tho. Could I just be looking at a slipping belt or a bigger problem.

Hi does anyone know what head gasket I need for a 300 TDI head.? The number on it is hrc2666. And there is a 3 on it aswell. I read the gasket should have holes in it to tell me what gasket it is but it doesn't. Thanks

Has anyone got any tips on bleeding the clutch on a discovery 1? . Have tried a power bleeder and the old fashioned way. The car goes into gear when it's not running but does not want to know when it's not. If u start the car in gear with the clutch down and your foot on the brake, as soon as...

Hi has anyone changed the bearing / seal on the front of the transer box? On a discovery 1. I have a leak coming from the front. For some reason it looks like (WHAT I THINK IS THE FLANGE) has come out of the casing and is sitting against the nuts that hold the prop shaft on.

Hi as anyone go any advice on getting the gearbox back into a discovery 1? It is in at the bottom but have a big gap at the top. Thanks

Does anyone know what coolant needs to be put in a 300tdi ? Thanks

Has anyone got any advice on how to change the rear hub seal on a discovery 1? Have got oil everywhere over the wheel.

Hi i recently brought a discovery 1 300tdi. To try and give it a bit more power I done the few bits you can do on the fuel pump. Its defontly got more go in the lower gears. Does anyone know if it's ok to use a boost pin and a boost ring after adjusting the pump ? Thanks

Hi. Hope someone can help. I have a disco 2 1999 td5. The brakes are are the issue. If u press the brake gently then the seem ok, if you press them hard they dont really do anything. I have replaced the front calipers as the seals had split and they seemed to be pretty seized but still no joy...