Search results

Can i change stc226 for ftc2882? I know the swivel ball will have to be changed due to the bush/bearing difference. But will the swivel pin housing?

Hi everyone, Ive recently bought a pair of used swivel pin housings. I think they are off of a discovery 1 300tdi with ABS. Can i swap the top pin for the later taper bearing pin?

Hi everyone, Ive recently bought a pair of used swivel pin housings. I think they are off of a discovery 1 300tdi with ABS. Can i swap the top pin for the later taper bearing pin?

Hello forum members, Is it possible to identify what my axles have come off? I bought my 90 with the intention to strip it down and rebuild. Its a 1990 vehicle with solid discs all round. Ive scraped the paint away to try and find any identification numbers but nothing has stood out yet...

This might sound dumb, but i honestly dont know! I have been looking for a radiator for my v8 conversion (defender 90 200tdi to v8) i have seen the allisport one with the 2 oil coolers and was wondering, Is it oil or water that goes through the cooler?

I’m after a defender v8 radiator cowl if anybody has one, Thanks Mike

Hi guys, A friend of mine has had an offer of first refusal on a hardtop 300tdi defender 90 ‘p’reg GENUINE 22,000miles!!! I've seen it and it is original and MINT! Question, how much is it worth? My friend has told me how much the seller wants for it, but being such a low milage vehicle its...

Hi everyone, Ive recentley bought a galvanised puma/tdci bulkhead for my project. I’m planning on fitting a puma/tdci dash. I would like to retain the heater matrix in the puma dash so i have a manual r380 gearbox out of a discovery. I’m interested in what others have done to ‘tidy up’ the...

Are the gear selectors on lt77 and r380 interchangeble on the discovery boxes?

NOW SOLD an lt85 gearbox with bellhousing, mounts, hi-lo lever +linkage. Untested, so selling as a donor/core deposit box Was going to put in my 90 but found a genuine r380 v8. £200 collection only, anglesey. Thanks mike.

Which carrier do you guys use with 35-12.5-15 wheels?

I’m after a 2.2 tdci bulkhead if anyone has a defender their breaking

Hi, I was bored and decided to decoded my vin number recently, looking at the vin number, the R states 110 24v Anyone else ever come across this? Its a 3.9 auto jap import 5 door SALLJRMM3TA******

can anyone give me more information on why there were two different bulkheads for the puma defenders. I assume that one is for the 2.2 and the other is for the 2.4. Plus does anyone have the part numbers for each. Searched the internet but doesn’t give a diffinitive answer on which is which. Thanks

Loads of series ones spotted on anglesey today. Anyone know whats happening? A rally of somekind?

What gets mounted onto these brackets on the front of the crossmember?

As some of you may be aware i am converting my 90 from a 200tdi to a 3.9v8, i have bolted the block to the gearbox, gearbox onto 300tdi crossmember and fitted the propshafts so i know everything is where it should be. I’m ready to fabricate the mounts to pick up off the 200tdi brackets. My...

does anyone know the part numbers for the rear side repeaters as found on the nas defender?

This thread is for anyone who’s thinking of converting from a 200tdi to a v8. I’m in the process if converting mine at the moment. I will be posting photos of the conversion as i go.

hope someone can help. How much does a bare rover v8 block weigh? I’m going to use a bare block for the mock up of the engine mounts for an engine conversion due to it being much lighter than a full engine. I have a 3.9 full engine with ancillaries ready to go into my defender but it weighs a...