Search results

Hi, Righty im going to be changing the steering wheel to a nice leather one in the next few days, but im a little worried about the air bag. Is just disconnecting the battery enough? or should i be doing something else? Also am i right in thinking the all i need to do is pop that front cover...

Hi, It sounds like you have two faults on the car. The first would have been caused when you went over the speed bump. when you had the air bags fitted if the pipes are not correctly inserted they can leak. as for the no communication fault, i agree that sounds like a problem with the plug in...

It may be worth your while asking if he wants to do a buy it now before the auction ends. Ive picked up loads of things cheap like that :)

Hi mate, Sounds like your havin bad times.. thought this might be of help to you. Take a look on ebay Range Rover P38 V8 Auto Gearbox on eBay (end time 22-Dec-09 10:11:58 GMT) this guy is selling a auto box and its on 99p, you never know you may get lucky, it is christmas and not alot of...

Thanks Gav, Right, its looking like i dont have the highline in the car, so next question, i can get a highline unit but have been told it migh not be a case of just pluging the unit in? do you know if this is right? again thanks for the help,

Goodtimes! I have just been messing with my old pc and found my copy of RAVE not sure if the file is to big to email but will try, or if anyone can tell me a way of sending i will be happy to send it to anyone that needs it. Happy Christmas! :):):):):):):)

Hi, No there is no white coach line down the outside of the car, only the plastic trim 2 3rds of the way down the doors.

Hi, Right, i have had a look at the becm under the drivers seat. the sticker on the side above the fuses doesnt say anything about Highline. just serial numbers and so forth. am i looking in the right place? also, i know there are problems with changing the Becm but can it be replaced with...

Hi Everyone, Im going to change the interior in my 1999 p38 from cloth to leather. The cloth seats i have in and not electric and the set i have brought are. Does anyone know if the wiring already in for the seats or will i have to buy a loom? also i know i have to buy the heater buttons, is...

more than likley the O rings on the heater matey... I had the same problem with my 1998... wasnt untill i put some anti freeze in that was red that i noticed it dripping into the car on the passanger side footwell. It, from what i was told can be a little tricky as most of the dash has to be...

Hi there... i had the same thing on a 1997 p reg i had a couple of years ago.. i didnt look on the slam pannel plate but on the log book it did say EFI and had the same think with insuance.. be interesting to find out why....

Hi, as some of you will know.. i had a copy of rave on my PC as i have sent it to a couple of people on request... but you guessed it.. Now its time that i need to use it... its GONE! always the case. can anyone help as im going to removed the transfer box at some point in the next few days to...

hi, yes the gear selections are fine... they are correct both on the center console and the dash. does thiis mean that the gearbox needs to come off? thanks for ya time

Hi all. still having the same problem. when i engage park on the auto box the car still rolls. anyone know what might be the problem

nice one mate. thanks

Hi, i need to check the oil level in my 1998 p38 4.6. i know there is a correct way to do it but cant remember if the engine needs to be running or not?

the idiot guide would be great thanks. my email is [email protected]. thanks everyone for all your help

im going to takkle the air suspention in the morning. can anyone give me some pointer's or a workshop manual... thanks

Hi all, well its been a while since i was here... but back from oversea's to my p38 and a hole host of new problems lol Well formost is the fact that i drove the car yesterday down the lane for the first time in a year as i have been working away. apart from having a leak on one of the rear...

no worries, going to pick a battery up in the morning. As for the O rings, are they quite easy to do?