Search results

mine was rotten past the putting a new pannle in so i cut it all out and used angle to make a new frame

have i got to take the drum off to adjust the cable?

hi were did you get your trailer test done for £135 i rang some one round my end and wanted £400 or £500 depending on weather i did the 2 or 3 day corse.

Hi would i be right in thinking the bolt head in the center at the bottom of the back of the drum is to tighen it up. my hand brake leaver is on it last click thanks. on a r380 box.

wasnt expeting that much thanks

hi iv got a disco with plus 2inch springs and shocks on can i fit the -2inch shocker mounts or will i have problems with shocks bottoming out thanks

hi dose any know how much longer the the disco bellhouseing to the defender one thanks.

any thoughts.

Hi just wanting to know will plus 3" shocks fit with plus 2" springs or will the shocks bottom out when the springs fully compress. iv got pluss 2" shocks and springs on now and was thinking of lowering my rear shocks an inch thanks.

telling you ist only 1 wheel drive is wrong it will only drop to 1 wheel drive if one wheel was off the floor whilst all four wheel have traction it will be putting power through all of them and you shoulnt use brake rollers on 4 wheel drive cars iv yet to see a 4 wheel brake roller the should...

iv got a tdi my mates got the 3.9 v8 after driving it, it would be the one for me if it wasnt for the fuel compsumption power wise a steep hill we went up from stand still i had mine in low box so it wasnt a problem for me were as his wasnt a problem in high box.

hi i changed the cambelt on my 300tdi today i turned it over a couple of times rechecked the timeing marks started it up started fine idles fine but when you pick the revs up the engine noise sounds louder and when i took it for a test drive it semt to be a bit boggyer no smoke the only other...

do they all have the same front doors and is it just the trim inside whats ddifferent thanks.

thanks but iv spat me dummy out and touched it since my door is held shut with a bunjy cord wraped round my hand brake im thinking of puttin an other door on

thort id finally chanage that spring in the lock so i dont have to use the key or keep leaning over to open the n\s door and so far i cant get the lock out cant get the glass out and broke my window slider, can any give me any tips on this job please iv had windows out of doors befor and they...

mines £330 with off raod and green lane cover all mods as long as i dont make it faster they just want to know what iv done to it.

thanks

i havent tryed yet but the multi spline nuts like whats on the swivle will normal sockets grip them or do i need to buy some female spline sockts?

ok cheers

getting ready to change mine and just checking, do you have to take the drive flange of then wheel bearing to remove the hub then you can get to the disk, thanks