Changing brake disks
- Thread starter mickdj
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
vivnap
Banned
- Posts
- 2,610
- Location
- south normanton
yes, remove the drive flange, remove the bearing retaining nut and remove the hub.
should take about 30 mins each side. but make sure you dont get any rust flakes or grit in the grease/oil inside the hub.
should take about 30 mins each side. but make sure you dont get any rust flakes or grit in the grease/oil inside the hub.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
A handy wee tip fur ye.....
When ye get the hub etc off, stick the hub and disk back on the wheel ye've just taken off. It makes it a lot easier to remove the bolts holdin' the disc on
When ye get the hub etc off, stick the hub and disk back on the wheel ye've just taken off. It makes it a lot easier to remove the bolts holdin' the disc on
Similar threads
