Search results

Hi guys, I've seen a 200 TDI which is breaking near me and I'm after a couple of parts. A rear tailgate wiper motor and a window frame for rear drivers side door (don't need the glass), and RH mudflap, would these parts fit my 300 TDI? Cheers Al

Hi again, managed to get a tear in my headlining material (Disco 300 TDI), any ideas on where I might be able to buy some and also how easy is it to replace. I've taken the lining out already so I have plenty of space. Cheers Al

Hello all, I have a 1998 TDI Disco and I've taken off the rear door card to replace the wiper motor. While I was at it I took the pocket off to give it a good clean and have managed to lose the screws and washers. I know it's not that important but my guess would be that the washers are M4 12mm...

Yaaahhh! or so I thought when I thought that this had fixed all my problems with my TD5 auto (2002). I'd posted on here before that my Disco kept jerking everytime I put my foot down, around 2.500 revs and I tried so many different fixes but once I had it checked out on the Nanocom it turned out...

Hello all, I'm going to spray an underseal/ protector on my Disco 300 TDI sometime this spring and change the clutch while I'm at it. One thing I've noticed is that there's sooooo much oil under there that I can hardly make out what's what, so while I've stripped off the exhaust, props, and...

It's definately the mechanism. A damn noisy one at that...

Yup, that's what I have on my 1998 TDI Disco. It works fine but I barely use it due to the racket & wining it produces when in operation. Is there anything I can do to it to silence it or make it quieter or are they all like this? I have the back off my tailgate as I've just repaired my rear...

Ooohh, That's right I forgot. My Disco is a 1998 TDI manual. Any wiser?

Hi guys, speedo not working since I changed the clutch a few months back. I reckon a wire's worked loose/ snapped/ or become unplugged. Is it the blue switch with the two wires going into it (on the transfer box). If not, where about is it. A picture would be great, can't find anything about it...

Does anyone have a picture of how the lock is supposed to sit in the tailgate ? Cheers Al

Hi all, just spent two hours in the back trying to figure out how to get the outside handle to work. Original lock knackered, bought another (springs all okay) stripped it all out, putting it back together it seems that the little lever which pulls up the lock mechanism gets stuck by the end of...

Cheers guys, I'll get on on it today! Thanks

Hi, I'm not too sure actually. Can't find a sodding thing about them in the Haynes manual either, maybe gear linkage plate or something like that?

Hi guys, just fitted a new bias plate but can't seem to find the torque settings for the bolts in the Haynes manual (plus should I put on some locking compound on the threads??), any ideas? also I tried downloading a "Rave" manual from various sites (for a 1998 Discovery TDI) but without luck...

Cheers for the reply, any idea what the parts are called (or numbers) so I can look them up on ebay or a motor factors shop?

What a bitch trying to get it into 3rd gear sometimes (300 TDI, 1998, manual). I changed the clutch and fork recently and I still have the centre console out so I'm thinking about trying to fix the problem. There's lots of play between the gears and sometimes I can't find third at all when...

and yes it's not from my Disco, now it's time for my wifes Peugeot 306. I was trying to change the clutch last night and got stuck trying to remove the pin to the clutch lever. The one in the picture is out and can be moved by a pair of grips or with a hammer but with mine it's flush against the...

Hi, I didn't change the rubber seal when I took it off as I cleaned it up and it looked in good nick, but there was oil leaking from the camsaft bit. I guess that's what needs changing. Cheers all.

Hi all, I changed the loom under the rocker recently and noticed that at the front (by the circle bit) there seemed rather a lot of oil which has built up. Any idea what's caused this or better still how to fix it. Thanks Al

Thanks guys, I took it to my local mechanic who reckoned it was my XYZ switch (as the car had stood still for a few months with a leaky footwell) then to my local indie Landy workshop who put it on a diagnostics machine, went through both the gearbox (the switch I think?) and motor and not a...