Speedo switch on the transfer box?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

fella31

Active Member
Posts
293
Location
Buntingford, Great Britain
Hi guys, speedo not working since I changed the clutch a few months back. I reckon a wire's worked loose/ snapped/ or become unplugged. Is it the blue switch with the two wires going into it (on the transfer box). If not, where about is it. A picture would be great, can't find anything about it in the Haynes manual?

Cheers
Al
 
Hi guys, speedo not working since I changed the clutch a few months back. I reckon a wire's worked loose/ snapped/ or become unplugged. Is it the blue switch with the two wires going into it (on the transfer box). If not, where about is it. A picture would be great, can't find anything about it in the Haynes manual?

Cheers
Al

Look at page 4C.13 in the disco manual 3016, the sensor is fitted by a single hex bolt and yes only two wires.
 
Back
Top