Search results

Is it the turbocharger boost solenoid valve or something to do with egr valve operation? Sent from my HTC Desire HD A9191 using Tapatalk

Hi Dave went to look at my maf sensor number today so I order the correct one and noticed a small black rubber hose that goes from the top of the intake pipe (engine side of the maf) to a small black box looks like a relay. The small plastic nipple ontop of the small box is broke and looks like...

Ok Dave. Thanks for that. Will get a new one then. Sounds perfect logic to me. Will let you know how I get on. Thanks again Sent from my HTC Desire HD A9191 using Tapatalk

Thanks for the reply. Had it connected to computer before and had a maf fault code. Cleared code. Drove for a week then took it back. No fault code. But getting real rubbish fuel economy. Car drives superb though. Like I said when u disconnect while ticking over there is no change whatsoever...

Hi again. Have looked around the manifold and there doesn't seem to be any black dust etc around it. Checked all bolts and they are all tight. Might just get another gasket anyway and stick it on and see if it improves. Cheers Sent from my HTC Desire HD A9191 using Tapatalk

Hi all. Sorry to hijack the thread. I have a mpg issue with my td5 where its using more fuel than it should. Less than 20mpg. I figured if I remove the maf plug and notice a difference it could be a maf issue. However on removing the maf plug I have noticed no difference whatsoever. So could it...

Hi all. Still not had chance to check anything out yet. Yes does sound lime screaming then goes away when warm. Hopefully get to look tomorrow. Thanks for all your replies. Will report what I find Sent from my HTC Desire HD A9191 using Tapatalk

Hi. I will check tension tomorrow although it doesnt sound like belt slippage to me. To be honest I thought it sounded like bearing seizure squeal. I will check bolts and belt tomorrow and hopefully is one of those that's causing it. Thanks again Sent from my HTC Desire HD A9191 using Tapatalk

No not yet. Will give it a go in a bit. Thanks. Just seen the price of new exhaust manifold! Not good! Sent from my HTC Desire HD A9191 using Tapatalk

No not been re mapped. Sent from my HTC Desire HD A9191 using Tapatalk

So that's what causes the squealing noise? Can it be re sealed or am I going to have to change the manifold then? Thanks for the prompt reply Sent from my HTC Desire HD A9191 using Tapatalk

Hi all. When driving my disco from cold, whenever the turbo kicks in it makes a horrible squealing noise rather than the usual whistle. This only lasts about a minute then goes back to a whistle. Anyone had this issue before? Any help much appreciated. Thanks Sent from my HTC Desire HD A9191...

Hi again. Thanks for replys. Had pump changed. Problem solved. Thanks guys Sent from my Desire HD using Tapatalk

Will I need any special tools or parts to do the job? Thanks Sent from my Desire HD using Tapatalk

Hi, Thanks for the reply. Managed to get a picture of it this morning. There is a small hole at the top of the stain just out of the shot of the photo where it must be leaking from. This maybe the weep hole you mentioned? The stain is quite big as you can see. Why would i not see it dripping...

Hi all. Not been on for a while as have had many months of trouble free motoring. Until now. Last year had head gasket done. Couple months ago started losing water slowly. Kept topping up and checking for leaks but no joy. Went out today topped up the coolant. Done 100 mile and all the water...

Hi and thanks for the replys. The switch does light up. Il test the plug tomorrow for voltage. Thanks Sent from my Desire HD using Tapatalk

Hi all. Can anyone tell me the best way of fault finding on my heated seats. The drivers side is not working but the passenger side is working fine. I have checked the bars under the seat cushion and they all seem intact. Had a look up the back of the squab and there is like a mesh instead of...

Have fitted the new hose and have bled the air out of the system at different temperatures. Still cracking the bleed screw every now and then just incase there is still some air in the system. Looking good so far! Fingers crossed! Cheers

Thanks for the replys guys. The head gasket went before due to the plastic dowels. They replaced the dowels with the stainless type. I spoke to the guy from the local specialist today who said that part of the hose is prone to go weak as it gets alot of heat! Hes getting me a hose to fit. I...