Search results

Ive had an on-going vibration at tickover on the Disco2 On the advice on Big lad and others, ive cleaned the MAP sensor, it was covered in a tarry mess, It seems a wee bit better, not right, but better, although it seems the inlet manifold is covered in the same muck. Is it worth...

No probs at all getting to this speed Just shove it out the back of a plane!

Thanks GUys, The egr is long gone, the tickover reads approx 600rpm, and whilst its better when shes warmed up, the vibration still there, but not to the same degree. I have had this for a while, it did seem a very gradual thing though, as opposed to starting all of a sudden I'll spray the...

H All, My D2 is running rough at tickover, lot of vibrations running through the car If i raise the revs a wee bit, it all smooths out. Im wondering if its a dodgy injector, or the copper sealing washers. In my world it always the pricey things though! Red plug is ok, and i replaced the...

Thanks guys I have already caught the Main dealer fitting a recon! Thats why i was looking for confirmation,,Thanks again

Hello all, Can anyone tell me if Adwest make genuine steering boxes for Disco 2's? I've had a supposedly new genuine one fitted by a main dealer, yet its clearly plated 'Adwest' Can some of our resident experts confirm please? Thanks

Check engine and gearbox mountings The engine mounts are oil filled, and when gone, they sit metal to metal, and the vibrations drive you nuts!

I have though about this for a while too, thing is, mines an auto, and its the worst autobox ive used in my driving life, too revvy and changes in the wrong palces I know the upgraded torque converter from Ashcroft, is supposed to be a great job, but without that, would the performance...

Good thread, Ive noticed though, that people say about the emmissions being so low Could we not mention this to the Road Tax thieving department of government? £280 per year is getting silly

You are bang on James, box is faulty Goes to show, brand new landrover part, still can be faulty cheers

Yes, bled it through the nipple on top. Pump seems fine, no bother prior to change, and is putting fluid through at quite a rate, Box was changed due to very bad wear I took it for a drive last night, about 12 miles, up to speed its fine, even tried figure of 8's in a car park low down...

I replaced the steering box on my disco 2 today, all went well untill bleeding it First off i was surprised to find an adwest box on the car, as its only done 135k, so i assume its already a replacement Anyway, i picked up a brand new old stock unit from a dealer, fitted it, and bled it...

Thank you James!

Hi All, Does anyone know if the steering boxes on a series 1 and series 2 disco are interchangable? They certainly look very similar, but im not positive Thanks Gordy

Ferodo or Mintex Top stuff, been around a long time, Mintex fronts, £25

Thanks Dave, I call them radius arms, and have replaced the bushes with poly ones cheers

Dave< By tie rods, do you mean the rods that run from the watts linkage to the axle and chassis? gordy

Thanks dave, Ive done exactly that, rubbers etc are ok, and i always find it hard to assess these sorts of bushes anyway, so they can stay there till they knock Ive still a wander to the left, and the wheel alignment computer is showing the rear axle sitting slightly to the right, i think...

Hi All, Has anyone a guide to assessing the play in the Watts linkage bushes? Mine are free enough, and when the arms are in a vice and pulled, there is no play to be felt, but im wondering if they can still be worn. Obviously i dont want to spend £150 on 3 bushes unless i have to! ive...

Unclipping the lines from the bulkhead helps lift it a wee bit more, u can get a 1/4 drive socket in underneath.