P38A Shaking , and squeaking

I’d rather have the option, given what abuse this one has been through, still in one piece and £14 to change I don’t care lol


Don’t think I could get a 20T press under here but Not anywhere near that to come out just patience and an hammer. Gentle taps bit of heat maybe. Mine have been greased up and looked after but outside cap will still be stuck. New ones will be pressed in by hand with a Gcramp thing with a trigger I borrowed, not tapped about

I think doing it on the box like that you can **** the seal up to the g/box

I will be gentler than the way it was grinding round driving it for few weeks and okay so far. Not being banged about or stressed irregularly?

You have a point but I’m too far in now... we will find out

Ordered Monday afternoon, came this morning
It has got grease in it but few pumps would fill it right up so no gaps for dust work in

Tell me what you think when you get it. I think it’s decent one at good price.
Goes lot smoother


One thing I did forget in my haste - I wanted to change it round so all the nipples line up on the shaft, but since I got carried away marking everything up it ended up going back same

RangeRoller dt said:

Tell me what you think when you get it. I think it’s decent one at good price.
Goes lot smoother
View attachment 178178

One thing I did forget in my haste - I wanted to change it round so all the nipples line up on the shaft, but since I got carried away marking everything up it ended up going back same

Click to expand...

I think you will find that the UJ's are supposed to be out of phase.

then I got lucky

They sent me the same one as you, I will get my son to put it in on Monday, I am having problems AGAIN with the air ride, wont go up or down, although the switch says different!!!!

It is a HD one apparently. Which one are you changing?

Front, front

Same as me then, don’t take long but access is the main thing. I not got problem with that no need to worry about bags dropping 2 1/2tonne on me. You got EAS software?

RangeRoller dt said:

Same as me then, don’t take long but access is the main thing. I not got problem with that no need to worry about bags dropping 2 1/2tonne on me. You got EAS software?

Click to expand...

Yea, but I cant do it, im useless

at crap like that

Dopey said:

Yea, but I cant do it, im useless

at crap like that

Click to expand...

Everyone gets old. This dicking about on your back under cars is a young man's game.

Grrrrrr said:

Everyone gets old. This dicking about on your back under cars is a young man's game.

Click to expand...

its hard to admit it though lol, but its true

Your good with leather (not the holiday chicken type) and pegs
Glad you got the right part (thank Grrr). I was originally quoted £36 for it, god knows how much garage charge to fit it

I was quoted £140, and he was going to send it off ( to Feltham UJ's) to be done and then fit it

£140! - i could probably order you one and come and fit it for that ! F*** me

£13.90 is fine

Dopey said:

I was quoted £140, and he was going to send it off ( to Feltham UJ's) to be done and then fit it

Click to expand...

I could do it for a case of beer. Probably a lot less than that

You put your diff back on first lol

RangeRoller dt said:

You put your diff back on first lol

Click to expand...

Now you sound like the wife. I'll have you know that diff is finished. Took way longer than expected, and consumed more of my beer stock than I expected too. But it is all finished.