mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
Ok its time to get off my arse and start on my brakes. Will sign in later with results
discs and calipers
- Thread starter mick the builder
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
good luck
thought it was mine!
New Member
- Posts
- 8,236
agree with above
mick the builder
Well-Known Member
- Posts
- 5,901
- Location
- Sligo,Wild West of Ireland.
Just got the front discs and calipers on. As far as i can see, i only have brakes on offside front and one side of caliper on front nearside, one side of caliper siezed. Surprised i got that done with 41/2 year old apprentice asking 1001 questions.All went well apart from changing brake pipe over to new caliper. Note to self, buy a proper spanner. Just got it cracked open with a good pair of pump pliers with caliper held in vice. Will change all pipes in one go to new before DOE test as sure they will fail. One thing i did notice, there was no shims behind the large circlip. there is a bit of in/out play on the axle but how much is passable? Tomorrow the rears.
