What have you done to your Landie today.

Freediscoranger said:

Went about changing wheel bearing, turns out all the play was due to the nuts holding the bearing in being stupidly loose. So tightened up and bearing left in place. Fingers crossed.

Click to expand...

Er do your wheel bearings have lock nuts or do they have nuts with deformable bits to lock them in place?

Not a lot. Checked fluids (all ok) and stuck a cargo net in the back.

changed my ujs about time to lol

Washed it, t-cut the greenlane scratches,:doh: then polished it top to bottom.

Changed the old glass-fuse holders for shiny new blade ones

started to refurbish bench seats in my 110
removed all the rust, sanded and primed for painting with hammerite on saturday

Stripped entire front axle. Prop off, diff out, half shafts out the lot.

I now need alot of new bolts, nuts and gaskets! Replacing the disks and pads whilst is all out too.

Fitted new lift pump and turbo hoses. Replaced the ****part polybush rear anti roll bar bushes as they were fecked. Looks like a few of the other bushes I fitted at the same time are worn so I'm going to have to replace them soon. Very unimpressed with ****part

wife took it for mot,changed air sus and filled up washer bottle wednesday, went to give it a good check over thursday but thought sh*t or bust and didnt bother.PASSED with flying colours to say im happy is an understatement:5bparty:

Drove it over 284 miles from Devon

put the transfer box back on

Put me power steering pipes on and brought radiator surround home for welding.

Instead of moving brackets on chassis I'm going to move the pins on the bottom of the radiator cowling so the rad sits lower and further back.

Taken the alloys and tiny road tyres off and put my steels and all terrains on for the horse trials at Weston Park this weekend

measured the grab handles

fitted an alternator to my 110

Round trip to Alive Tuning for ECU remap ..... Still grinning now.....

Treated it to a full underbody hot water pressure wash followed by an all cavity and underbody waxoyl. Not cheap, but given how clean the chassis is at present should pay me back in time.


Tazz

gave in to the wife and gaveit a wash

Devilman said:

Taken the alloys and tiny road tyres off and put my steels and all terrains on for the horse trials at Weston Park this weekend

Click to expand...

Errm think they only let horses enter the trials??

bought a new one