Zu Rims on 200tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

MarkyPD

New Member
Posts
99
Location
Darent Valley. Kent
Will I have ant problems fitting Zu Rims (yes i wont to be pimp) on my 92 200dti with rear drum brakes??

Was going the put them on when I order some BF All Terrain T/A LT265/75's
 
probably if it's on drums at the rear. also check length of wheel studs. I fitted steel modulars to the 90 and the studs were too short.

I was thinking I would have problems. Black steel modulars where my fall back option if I couldn't fit Zu'z. Replacing wheel studs sounds like a pain.
 
no problems my mate has them on his td with drums on the rear just get land rover alloy wheel nuts if there not supplied
 
ZU-Rims fit any axle, drum or disc but of course you need the correct wheel-nuts.
I bought a set when the first came out (that was about 2006-7) and ran them for many years, an excellent quality wheel which does not give any problems with balancing.
I only replaced them as after about 8-years the paint was starting to mark in a couple of places (don't get me wrong, they weren't scabby but just chipped in one or two places) so as they would have needed a re-paint at some point in the future I decided to fit Sawtooth alloys instead (for the more OE look). Off came the ZU's and they were sold on.
 
Back
Top