zf auto issue

hi guys

can you help i have an issue, it seems someone bodged the drain plug on the gearbox and i now need a new one can i get one on line or dose anyone know the thread size?

its not metric i know that much i think its unf.

i dont want to drill and tap if i dont have to.

cheers

If it's just the plug and washer u require then RTC4647 plug and STC1060 washer is all u require, both from your local LR parts supplier.

thanks for your time disco cool

disco dude said:

thanks for your time disco cool

Click to expand...

It's great when someone say thanks, so THANKs to you for saying thanks...

It takes nothing to say thanks and it always goes a long way.

Btw I have ordered a new one I just need to collect it from the post office hope to get the box refilled tomorrow

Got to clean off and paint the gearbox cross member and that's it all done

Then onto the cam belt and adjust the rocker arms and so forth

Ok bung fitted and around 7 Ltrs of ATF oil in, oil a little warm now and reads a little over so I will wait till tomorrow when I refit the painted gearbox sub frame and have it all supported on its own.

I have had her in neutral and idling a added 0.5 Ltrs after the 1st five and just left the old girl to idle. I have put her in drive twice on idle to let the oil circulate a little and I feel her take the strain so I'll see how she fairs up tomorrow I guess

That's correct fluid level check on a cold engine on disco after running the selector through all the positions, With my Honda it's checked when the engine is hot and some cars have hot and cold on the dip stick.

Gearbox done now found rear calipers seized up and need repairing :-(

Mind you I haven't used her for about 3 months as I use the works van a lot