Wobbly Turbo

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

ERR4419blues

New Member
Posts
21
Hi all. Whilst in the process of building up the 300tdi lump I noticed a bit of play in the bearing (approx 20 thou) when i held the spindle of the turbo. It didn't smoke when it was running before, should I worry?. I'm a bit nervous with these posh discos after having owned series 3's before.
 
Hi,the bearings on the 300 tdi are run on oil so you will get a bit of play as long as there is no trace of blades scraping the sides then it should be ok as i was worried when i first checked mine hope this makes sence,tiga
 
Thanks tigapiglet. I'll not be having any nightmares now about turbo blades getting mashed up in the engine.
 
Back
Top