wiring Loom Help!!

Hey everyone,

i am new to this but i have been reading coments on here for ages but the time has come where i am suck and need help.

i have a defender 90 now the chassis is a petrol but i am putting a 2.5td in it.

all is well afer replacing bulkhead ect however i now have the problem of the wiring loom as it means nothing to me.

Any ideas on the easiest way to do it and where to start i have no idea :s really need help

Thanks

Gami

Not sure of petrol to TD. You could grab a TD loom from a scrappy and use that?

Or upgrade to a 200tdi and use all the bits.

yu dont need much - leave starter stuff the same and put the wire going to the coil to the cut-off solenoid.
get a 200tdi heater circuit.