1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

wiring diagram for a disco 300 tdi

Discussion in 'Land Rover Discovery' started by kdrobin, Jun 13, 2011.

  1. kdrobin

    kdrobin New Member

    Joined:
    May 18, 2011
    Posts:
    1
    Likes Received:
    0
    Hi can any one point me in the direction were i can find a wiring diagram for my disco eg a link:)
     
  2. lazydog

    lazydog Well-Known Member

    Joined:
    Jul 1, 2007
    Posts:
    1,592
    Likes Received:
    0
    Location:
    West Midlands
    How about saying hello in the welcome section and have a read around the site or search the site try searching for "rave"
     
  3. discool

    discool Well-Known Member

    Joined:
    Apr 25, 2007
    Posts:
    9,179
    Likes Received:
    61
    Location:
    Sector 12 in Kent, The Garden of England
    And.... there's more than just one diagram so do you want the lot?, if so get yourself a Haynes manual they are all in there.
     
  4. terrymann

    terrymann New Member

    Joined:
    Jun 26, 2011
    Posts:
    2
    Likes Received:
    0
    Location:
    Norwich, Norfolk
    I bought a Haynes manual for my Disco and yes it does have most of the usual wiring diagram stuff but it shows nothing of the immobiliser systems [which is the bit I need].

    Does the Rave disc contain 'ALL' the wiring diagrams? including immobiliser.

    My 300 tdi is a 1997 model with no spider unit but instead has a black box [fed by several wires] on the diesel injector pump, this covers [and I assume powers] the stop solenoid. This isn't the EDC type with fly by wire throttle as mine has a throttle cable and EGR system. After a bit of a melt down of the wiring harness I need to find out how it all works and where things are fed from.