window wont set problem????

K

kj200sx

New Member

Posts

302

Location

northampton

• Mar 25, 2010

• #1

hi all my drivers side front window will not set for some reason it goess up and down fine but still just says not set the only thing i have noticed it the one touch function for open/close has stopped working on this window could this be the problem as was going to swap with another switch to see if cures it or will i be wasting my time any help would be great thanks

 

DM68

Active Member

Posts

246

• Mar 25, 2010

• #2

Have you tried to set it ie. all the way down and then all the way up and hold for a few seconds bearing in mind that you have to do this all in a continous motion.
Also check to make sure that your glass actually goes all the way up because if it doesn't thats usually a sign that your window regulator is on its way out and if it is you wont be able to set your window.

 

C

ckc100

New Member

Posts

37

Location

Morayshire

• Mar 25, 2010

• #3

I noticed this same fault on mine today as well I got in the car and drove for a while and it came up with the window needing set. Done it again and it has been all right all day. Thought it was a strange but the single action button did not work with it either. Unitl it reset.

 

A

AlexxLush

New Member

Posts

94

• Mar 25, 2010

• #4

I believe that the one touch function doesnt work until the windows are set. Sometimes setting them can be a right pain, it took me a few trys to get all of them done; as previously said if it isnt done in one movement then it doesnt work and register as set.

 

K

kj200sx

New Member

Posts

302

Location

northampton

• Mar 26, 2010

• #5

have done this but not in 1 movement will try in the morning and let you know how i get on thanks

 

Datatek

Well-Known Member

Posts

45,015

Location

Near Poitiers SW France

• Mar 26, 2010

• #6

One touch only works when the windows are set

 

K

kj200sx

New Member

Posts

302

Location

northampton

• Mar 26, 2010

• #7

tried doing it in one movement several times but still wont set anymore ideas people ????

 

kernowdragon

Well-Known Member

Posts

1,918

Location

Wickford, Essex

• Mar 26, 2010

• #8

Mine does this occassionally and then disappears without doing anything.... my theory is a poor earth somewhere in the circuit, but haven't had time to investigate.

 

K

kj200sx

New Member

Posts

302

Location

northampton

• Mar 27, 2010

• #9

as above has gone as quickly as it came seems ok now so will look further if it happens again thanks again for the help people it much appriciated