which EAS ECU

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

sarstad

Active Member
Posts
394
Location
Torkilstrup (Denmark)
hey

i hav just bought mu first range rover p38 DSE

but the gay i bought it from have fore som reason taken out the EAS ECU :mad:

nov i have looket on ebay after on but i can see that there is a difference in the nummbers .....

now my ? is which EAS ECU do i nee for my 96 p38??
 
So how do you keep the suspension inflated?

I reckon you will have to source an EAS ECU from the same year as yours to be safe. Others like Irish rover may know better.


:) thet is dte problem the car is on the bump stops :eek:

can see thet you jan a 96 2,5dse
is it possible that you and give me then number on yours EAS ECU??
 
And you bought it on the bump stops?:eek:
I think they're all the same but as Datatek says, others such as Irishrover may know better. Ebay is your best bet for a replacement. I got one from there for around £30 and it's fine. There's not a lot goes wrong with them, it's usually other parts of the suspension that give the problems. Are you sure all the other parts are there - compressor / valve block assembly etc?
(I only changed mine as the faultmate wouldn't read it for some reason although a Rovacom did).
 
All of the P38 EAS ecu's have the same functionality - so thats any of them with with two screw holes holding them down to the floor of the car.I say this because the earlier Classic ecu's have fixing screws in the same plane as the plug on the end.Hope that makes sense.;)
 
Back
Top