Where can I find the heated seat relays?

As the title says, does anyone know the exact location of the heated seat relays?

There aren't any, seats are controlled from Hevac via BECM. Fuse 2. 30 amp

Arh....ok thanks wammers, so if there is power to fuse 2 under the seat but not to the connectors that join to the underneath of the seat then the BECM is at fault?

They were held at the 2012 Heated Seat Olympics

clivesP38 said:

Arh....ok thanks wammers, so if there is power to fuse 2 under the seat but not to the connectors that join to the underneath of the seat then the BECM is at fault?

Click to expand...

Check fuse 2 if that is ok. Check for power to white connectors, L/H C1401 pin 1 Brown/Red. R/H C1403 pin 1 Brown/Blue. If there is power to those. See RAVE heated seat diagrams for further connectors in this circuit for continuity checks.

strange_days said:

They were held at the 2012 Heated Seat Olympics

Click to expand...

:hysterically_laughi.........

Always worth checking the multimeter lead hasn't got a break in it's wire!! Getting power to the connector so now taking the seat apart looking for a break in the seat base.

clivesP38 said:

Always worth checking the multimeter lead hasn't got a break in it's wire!! Getting power to the connector so now taking the seat apart looking for a break in the seat base.

Click to expand...

Yes multimeters that actually work are a great asset.

There's a good article on p38 heated seat repairs at rangerovers.net.

Followed the rangerovers.net instructions on the heated seats and upgraded the thermo switches and mended the breaks in the heated elements. True to form the breaks were in the base of the seat in the crease of the leather. Also had a broken connector to one of the thermo switches. First seat was a bit daunting not having done it before but the instructions were great, the second seat was a piece of p!$$. So what was the outcome.....well the seats never worked so anything would be a bonus, but the seats are hot, so niccccccccccce!

Good news. Good job.

Just a quick update.... My drivers seat stopped working, it's been two years since I fixed it! Turned out to be the spade connector on the thermo switch in the seat that I upgraded had come off!! A lot of work stripping down the seat just for that so take a bit of advice...if you have your seat apart to mend a broken wire SOLDER the wire to the thermo switch.