what used to be here!

Hi guys, I seem to have a gap where I recon there should be some sort of mud guard/inner arch type affair, please excuse my ignorance, I've only had the Disco a couple of weeks. I've attached a couple of photos of what I'm looking at, the first one is the rear passenger side and the second the rear drivers side, as you can see some of the plate in question is still there on the passenger side but almost totally rotted away on the drivers, can any one tell me what these plates are called or give me a part number, beter still would be a drawing or patten so I could fabricate my own. Many thanks for those of you that take the time to have a look. Its a 2002 td5 xs by the way.

This may be of assistance

http://www.landyzone.co.uk/lz/f8/rusty-mud-flap-brackets-190780.html

Nice one Bigeeee.

You can get galvanised ones on ebay for £20-odd quid the pair. Not worth making them for that.

iansoady said:

You can get galvanised ones on ebay for £20-odd quid the pair. Not worth making them for that.

Click to expand...

My new ones cost zero to make, so disagree and think they were very much worth making. Nearly three years on and they are fine.

Just done mine.Ebay and some good pop rivets.