What have you done to your Landie today.

buckshot · Nov 8, 2011

blue beasty said:
Hmmmm.....nice idea.....I like that

the 3x2 came from some bench seats in the local park , the local yobs smashed um up so we had to clear away the wreckage and fit some metal ones

think i should thank the little darlings for their efforts

DEFENDER90-DAZ · Nov 8, 2011

Fitted some red SMD led light strips today, around the boot and in the footwells, got em coming on and going off with the internal lights - looks awesome!!!!

Changed the internal light festoon bulbs with red led ones too

bri999 · Nov 8, 2011

finally got the clutch system to bleed and now have a working clutch again with redbooster kit installed. Hopefully it will help with the knackered knee otherwise its time to sell up and buy something else

andlover · Nov 8, 2011

worked the eberchbärher or what its called...from my disco, got the 0,9litres fuel tank in enginebay (return line)and welded few frames to the headunit bracket. tomorrow im going to connect water hoses in cylinderhead and the miniclock in cabin.

storm99 · Nov 8, 2011

Drove it to manchester and back without becoming addicted to glue or shagging my grandmother.

GRATCH · Nov 8, 2011

storm99 said:
Drove it to manchester and back without becoming addicted to glue or shagging my grandmother.

.....Or shootin anyone.

Ya never said you was up this way and I've not seen any trails of rust left anywhere.

lee s · Nov 9, 2011

taken delivery of some rock/tree sliders.told the missus they are side steps to help her get in!:decision:

Oldseadog · Nov 9, 2011

Thought about giving her a wash, then decided against it as it's ****ing down!

Might think about it again sometime

Oh, and might modify and fit the new bar on if I get round to it. Has to be modded so it doesn't interfere with the front bumper-mounted towball.

OSD

[JP] · Nov 9, 2011

buckshot said:
got 1 side of the tub top tree sliders made and fitted , save meself another packet knew i had some 3"x2" seasoned oak tucked away (came across it looking for something else i still aint found yet :doh
will be stronger than the ali squire tube 1's on the market

that bloody inverter earned its keep again running the jigsaw to cut um.

Nice one mate... good idea!

but... what's with the green hoop and sliders???

mikescuba · Nov 9, 2011

Can't wait till Monday when my Salisbury axle arrives. Also ordered some new front shockers whilst I have my hands dirty and the front stripped.

mad git · Nov 9, 2011

Managed to rip out the tail lights and stuff new ones in

Andy Land · Nov 9, 2011

Looked at her and wondered whether I should clean the green laning mud off from Sunday! ... I decided to drive quickly through the local ford a few times instead

The Mad Hat Man · Nov 9, 2011

lifted the tarpaulin, looked into the rear tub, lifted the front nearside, saw the lack of wing and pulled the tarpaulin back down again.

surreyrock · Nov 10, 2011

My LED bulbs turned up

Before

After

renton500 · Nov 10, 2011

Got a new MOT for the classic with 0 advisories. That never happens, must be something wrong lol

The Mad Hat Man · Nov 10, 2011

Taken the Disco for an MOT :I

10 failures... 8 advisories :faint:

Could be a busy couple of weeks

.

baggyjim · Nov 10, 2011

buckshot said:
got 1 side of the tub top tree sliders made and fitted , save meself another packet knew i had some 3"x2" seasoned oak tucked away (came across it looking for something else i still aint found yet :doh
will be stronger than the ali squire tube 1's on the market

that bloody inverter earned its keep again running the jigsaw to cut um.

will soon be looking like the morris traveller my grand dad owned

buckshot · Nov 10, 2011

baggyjim said:
will soon be looking like the morris traveller my grand dad owned

better that than joseph's technicolour dream coat

surreyrock · Nov 10, 2011

The Mad Hat Man said:
Taken the Disco for an MOT :I

10 failures... 8 advisories :faint:

Could be a busy couple of weeks .

10 failures

what were they ? (roughly!)

The Mad Hat Man · Nov 10, 2011

3 lots of welding
3 ball joints
steering box (anyone gorra 300TDi one - or will a 200TDi fit?)
headlight wet inside
number plate bulb out (it werent when i checked at the w/e

)
front ARB excess play (bush?)

What have you done to your Landie today.

Well-Known Member

New Member

New Member

New Member

Spreading Joy & Harmony

HUGE MEMBER

New Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Active Member

New Member

Well-Known Member

New Member

Well-Known Member

Active Member

Well-Known Member

Similar threads