What have you done to your Landie today.

Swapped rear springs between two Discos so thats two changes by 1:00 thisarvo. Thanks to Daftlett and Mark for all their help .

ive done fook all to a landy... but bought set of wiper blades and oil filter for ickle micra from local trade parts place.... £12

I'm trying to fit the brake shoes the correct way first time round regarding where the springs go and in which holes in the shoe crescents. This is part of my restoration project and I wish I have taken more photos before dismantling some items.

reversed it into the bosses wifes audi a4:doh:

Introduced her, and me to green laning!!

replaced rear brake pads and fitted the CB.

got the hammerite out to paint rear bumper and tow bar. next i need to figure out how my battery is keeping charge while i have 2 loose wires in back of alternator

Thought about changing the oil - then thought better of it .

Sorted out the starting problem.Fitted the rear wheel hanger to door and started on the wirin

Fitted a set of front light guards.

Repaired the rear door lock - bought a kit off fleabay for a fiver.

Tried to fit the roof tent on the new roof rack - the tent is a wide model and turned out to be an inch too wide - regalvanised brownchurch roof rack with new fittings now on fleabay (boll%cks). Flamin gutted.

Fitted new tubular turrets. Was going to fit my new tailgate but just couldn't be arsed. Have to do it tomorrow and sort out the gearbox oil as the dipstick shows it's way overfilled.

checked oils. checked sat nav and realised (35 mins ago) NO WADING PLUGS - so gone and swapped em from the convertable .

primed and then undercoated my series 2a in the gorgeous sunshine today, hope its dry tomorrow, nato green here we go!!

drove to the steam engine yard and moved a 12 ton traction engine around for a bit (needed it the other way round in the shed)

Video to follow for those that do not believe...

Apart from drivin' it.. nowt!
Was busy with other stuff tonight tho', mainly bike stuff...

I fixed my heater vents so the footwell vents work. Plastic sheath over the control cable connected to dash lever had worn. Added some tape and tightened the clamp. Easy job that now keeps my feet warm...

new rad.

Replaced brake master cylinder (yesterday). Brakes still not sorted. Took servo off - rusty water came out of it

instantsquid said:

Replaced brake master cylinder (yesterday). Brakes still not sorted. Took servo off - rusty water came out of it

Click to expand...

factory standard then

Checked oils, tyres then T Cutted the whole thing after Laning tother day!! Now time for the pub....:beer2: