What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Last weekend I jet washed the underside of my 110 useing my new powerwasher that I got for crimbo.
This was so that I could paint the chassis and replace the rear diff gasket that was leaking.

When i'm working under my landy I prefer to drive it up onto a couple of pallets;
SNV30328.jpg


I then stripped the rear diff;
SNV30329.jpg


Cleaned and painted the diff pan;
SNV30330.jpg

SNV30332.jpg


The reason the gasket was leaking?, the breather was blocked solid!!!
 
Gave mine a general walk around check. Lights, tyre pressures, fluid levels etc. Found I had a tail light out. Went to change the bulb and found that it was ok. Looks like I'll need to spend a bit of time tracing the wiring back. I also found that the bulb holder was in a pretty bad way so think I best get a replacement.:(
 
Fixed both front door catchs. I could not open the door from the inside!
Replace the black plastic things that go arount the button that locks the door from the inside. greased the window mechanismsismsismnsss and generally found shed loads more that needs doing....need to replace thermostat and sensor tomorrow and clean out the intercooler.
Great..love itttttttttttt
 
took rear working light off as the bracket had snaped "will sort when i can be assd lol" then went laning with a mate in her D3 lol then gave the disco a wash ready to make her dirty again in the week :)
 
Little darlings at school smashed up the soil pipe yesterday so no kids in school today :D
God bless health and safety...........means I got to drive around the woods all day dragging timber without having to pretend I was teaching anyone anything.....awesome!!
 
Drove up to Paddocks 230 mile round trip collected a hand brake cable went to anchor supplies asked for a part and was told to bugger off! so I came home and fitted hand brake cable need to complete it tomorrow or a roof swap if weather isn't too bad.
 
October last was at Aldermaston and on one of the water bits as i came out I caught the Font valence and pushed the Fog light back and up,:(:(

Today walking back to the car in Tesco's car park got fed up with seeing a bent fog light and cracked valence :(:(so Today I took a Hacksaw blade to it:D:D
and this is the Result, Tomorrow just got to tidy that bar as in sand it then Hammerite it:D:D

Landy1uk.jpg
 
Gave RR a service, all except one pollen filter that some twonk put wrong screw in cover and it solid. Oh and the fuel filter as didnt have time to do it. Found leak on rad and hole in middle box
 
Back
Top