What have you done to your Landie today.

Changed the Turbo (Old one sounded like it was about to say good bye) and New Manifold Gasket.

Was smoking after i done that, so i adjusted the pump fueling (Pin on Boost Diapham) and i think that has curred it... Can't tell because it was dark...

So i cleaned all the glass, Removed the **** out of the back and strapped my tool box down

took mine out for a drive to work, then went down a narrow track to my mates house and found some mud on the way, then tested my tow bar electrics etc as fitted it the other day. but my indicator's don't flash so i think i need a new relay

Was going to take mine out last night however would appear Bures has done more thn kill the starter motor.
Tensioner is very noisey and its not charging even with the good battery out my astra.
Probably gona have to get a replacement alternator i reckon.

Stripped and repainted the prop-shafts on the Series - ordered some luvly new Hardy-Spicer UJs to rebuild 'em with.

Took mine out for a spin in the early hours of this morning........


































To extract a police car stuck in a boggy park. He'd found the wettest patch created by the valley of 2 banks while chasing some theiving oiks. They did get em though.

piccies!!!!!

ratty said:

Took mine out for a spin in the early hours of this morning........


































To extract a police car stuck in a boggy park. He'd found the wettest patch created by the valley of 2 banks while chasing some theiving oiks. They did get em though.

Click to expand...

should a left the coonts there

goonarmy said:

piccies!!!!!

Click to expand...

Unfortunately I didn't get any pics as I didn't have my camera with me and I forgot to grab my PDA out of my truck.

Strapped a 50ft post to the defender and took some photos of someones house from his grounds!

resulting photos

Spent all morning tryng to get the 3rd screw out of the water pump pulley, dam thing is well rounded , gave up will try tomorrow.........

Then I can get the pump changed.

Put a deposit down on a classic 3-9 m-reg

fitted me new seat covers to the 110 (only trouble i need some more covers to keep um clean now )



oh and fitted a K&N air filter to it as well

nice covers there Buckshot.......

I been putting my Diff guard on the front, Have also put new Pads front and rear, front was down to about 2mm, rear was shal we say what pads!!!!!!!!, discs still ok tho, thank goodness.

Looked at a noo one and bought my old one back

i got rid of those plastic bleed screws from the water system and fitted brass radiator bleed screws, one i had to cut out as the last owner had glued it in

spent the morning cleaning the underneath ready for a waxoyl session tomorrow - bloody typical though its started raining.

I just tightened up a bolt holding on the side steps of the Disco! i wish all jobs were that easy.

The Mad Hat Man said:

Looked at a noo one and bought my old one back

Click to expand...

is there a engish translation for this post?

fitted me EGR blanking kit so should be some improvement with that and the K&N as well , we shall see

buckshot said:

is there a engish translation for this post?

Click to expand...

Went to Dudley to look at a replacement discovery and bought back the old disco from the insurers as it is now a cat B write off.

So anyone know if a reasonable 200tdi going , let me know.