currymunster
Well-Known Member
- Posts
- 803
- Location
- Folkestone, Kent.
It's been almost six months now since my beloved 1995 110 csw was written off by some old git(no offence to you lot on here
)
I have saved my money and now have a replacement wing and front axle.
While it's having the chassis straightened and all the other stuff done on my driveway I thought I'd address some other issues. Radiator being one of them, which posted about previously.
Thought I'd give all the water ways a good flush and clean but wondered if there was such a thing as a descaler/cleaner for it. I have some rather vicious stuff for my kettle which is formic acid. Thought this might be a bit too much. I'm in a hard water area so with the temperature it must cause scale to build up - Is there anything on the market I can add and run the engine for a while before draining.
Oh and is it worth using the de ironised water to refill??
James
I have saved my money and now have a replacement wing and front axle.
While it's having the chassis straightened and all the other stuff done on my driveway I thought I'd address some other issues. Radiator being one of them, which posted about previously.
Thought I'd give all the water ways a good flush and clean but wondered if there was such a thing as a descaler/cleaner for it. I have some rather vicious stuff for my kettle which is formic acid. Thought this might be a bit too much. I'm in a hard water area so with the temperature it must cause scale to build up - Is there anything on the market I can add and run the engine for a while before draining.
Oh and is it worth using the de ironised water to refill??
James