ferryhill flyer
New Member
- Posts
- 5
- Location
- co durham
washer jets have broken off due to ice fall off roof on my 110 puma 59 plate anyone got any advice how to change it thanks
washer jets front windscreen
- Thread starter ferryhill flyer
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
zeaphod
Well-Known Member
- Posts
- 3,103
- Location
- Belfast, Norn Iron
If you search the forum you'll find the answer to everything: https://www.landyzone.co.uk/land-rover/replacing-windscreen-washer-jet-defender-tip.108178/
ferryhill flyer
New Member
- Posts
- 5
- Location
- co durham
thanks zeaphod I thought it was a dash out job I will have a go at that in the morning
Now would also be the perfect chance to upgrade them and fit a pair. If you use the holes for the left hand drive wipers there is no drilling. All you need is a y-peice to fit into the existsing pipe and then two new lengths to go to each washer jet, one each side. Big improvement over standard.
bluedog333
Well-Known Member
- Posts
- 5,348
- Location
- Henley on Thames, Oxfordshire
Pretty sure the Pumas don’t have the spare hole. One of the first ‘upgrades’ I did was to fit the extra washer, makes such a difference.
I forget not all land rovers are old ones! Shouldn't be too difficult to drill a pair of holes if they are not already there though. It makes a huge difference, and I now have the wiper mounted jet bar off a Peugeot 405, even better again.
