Disco 2 Washer Bottle QR connector

My facelift discovery 2 had suffered a bump to the front and I have just been replacing the bumper. The headlight washer pump outlet pipe had also broken off, so I sourced a replacement pump but now I come to connect it up I've found the pipe end of the "quick release connector" has snapped off in the pipe. I have done a bit of searching but cannot find the QR connector shown on the diagram I pulled up.
Does anyone know the part number so I can try and source one ?

Click on the number of the part you want if you find it in the following diagram http://new.lrcat.com/#!/1232/36532/36627/2778/36675

Thanks, that's the diagram I have looked at and it doesn't show the part. Part 6 is the headlight washer pump, but it appears to show the pipe going to the bottom of it and just a compression collar - there's actually a quick release connector there as well.

Unfortunately if it's not on that diagram it's not sold as spare .

Phew, managed to pick one up at a breakers yard. Its interesting, the headlight washer pump is common to a lot of cars, but I've only seen the Discovery with the QR on the pump outlet - all the others are straightforward pipe connections. That was going to be my backstop if I couldn't find a QR fitting - just fit a pump that doesn't need one, from another car. But as luck would have it there was a Discovery there, almost totally stripped - apart from the washer bottle assembly

Thanks for the help sierrafery !