warning lights on dash!!

hi there ,can anyone help . I have got 3 warning lights on the dash of my newly purchased disco 2 52plate that wont go . they are TC light down hill decent and ABS . is it a simple fix or a long drown out process . cheers

Search "3 Amigos"

youll need to enlighten me I thought they were a group of Mexican cowboys

Its what the 3 lights are know as, u probably have a faulty abs sensor but will need a nanocom or hawkeye 2 read codes so u know what 1 to change.

welcome to the amigo club im in the same boat as you at the moment just waiting on a diaganostic plug in so that I can put it right

A quick check whilst you're waiting for a diagnostic plug in: Jack each wheel up and try & wobble it at 12 & 6 and 9 & 3 o'clock positions. Also rotate the wheel too: Any wobble or roughness will point to that wheel hub needing replacement and it will most likely be the one causing an ABS sensor fault (NOT ALWAYS, BUT LIKELY). The ABS sensor fault brings up the 3 amigos because all 3 systems work off sensing wheel speeds. Easy fix is replace the offending hub... Definitely replace a hub if there's play in it regardless of an ABS fault

It might also be the ABS shuttle valve sensor fault - a relatively easy wiring fix sorts that one out.

LAMPRO said:

welcome to the amigo club im in the same boat as you at the moment just waiting on a diaganostic plug in so that I can put it right

Click to expand...

pm me if u can get to me ill plug it in for you im not to far

Just check that the abs sensor wires are still connected at the plugs, clipped into a little bracket on the chassis
had this on mine this weekend, must have over extended the cable and pulled the plug apart.
dash lit up like xmas tree
plugged back together and all lights off again
hth
rick