L322 Warning/Error message on display when turning engine off help needed

knightrider · Apr 12, 2019

hi guys in the last week or so my car dash display has started to flash a warning message when I turn the car off - the problem I’ve got is my display is pixelated so I can’t read what it says properly.

I thought I would share a couple of photos of the display on the off chance someone here recognises the message. My car is a 2004 4.4 Petrol/lpg and as far as I can tell it’s running fine with no issues or error codes.

Thanks in advance for any help

DanClarke · Apr 12, 2019

If you look in Rave it may give you a clue.
The first bit I looked at showed this: Look familiar at all?

There is a full list of the possible messages after that page and there are a few that end with an E on the first line.

backinblack · Apr 12, 2019

looks something like IMPOR___ION TIRE to me

forget the TIRE bit, they spell it with a Y

DanClarke · Apr 12, 2019

backinblack · Apr 12, 2019

I looked at them as well but nothing seems to match what's left of the pixels.

DanClarke · Apr 12, 2019

If you have TPMS operational. Pump the tyres to the correct pressures and reset the TPMS.

knightrider · Apr 12, 2019

Hi guys thanks for the replies, I don’t think I have tpms - what’s the reset procedure for that on a 2004 as worth having a look?

It’s defo a brain teaser as can make out some of the letters but not enough to actually tell what it says!

gold rover · Apr 12, 2019

Personally, I'd say check all, that you can , on the list above. Once all levels, etc, are checked, see if warning returns. Also which system are you using to check faults? Whilst many are called, few are chosen. In other words, make sure you have a system that the vehicle will expose all secrets to

DanClarke · Apr 12, 2019

Sorry, don't understand why you don't/can't read your own Owners Manual or look it up in RAVE yourself.
Do you want me to pop round and push the button for you if its there?

td4van · Apr 12, 2019

It looks as if it’s in a foreign language to me....

Do you have a sat nav screen?

kermit_rr · Apr 12, 2019

I can't make those pixels into any of those message options. Not even if i squint
Have you tried pressing around the display? Might bring a few extra pixels back to life for a moment

knightrider · Apr 15, 2019

Hi guys just to give closure to this thread I have done some more digging and have got to the bottom of it. I upgraded my nav to the mk4 dvd version last summer and for some bizarre reason when turning off speed camera alerts it changes the language from English to French in the dash display only.

I put the speed camera alerts back on to see what the warning message was and it turned out it was just the headlight delay warning that comes on when turning lights off after removing keys to give an extra 20 seconds of lights.

Nice to know there was no bigger problem, thanks again to all who chipped in with help and advice

Saint.V8 · Apr 16, 2019

knightrider said:
Hi guys just to give closure to this thread I have done some more digging and have got to the bottom of it. I upgraded my nav to the mk4 dvd version last summer and for some bizarre reason when turning off speed camera alerts it changes the language from English to French in the dash display only.

I put the speed camera alerts back on to see what the warning message was and it turned out it was just the headlight delay warning that comes on when turning lights off after removing keys to give an extra 20 seconds of lights.

Nice to know there was no bigger problem, thanks again to all who chipped in with help and advice

Well feck me.......

I did the same a few months ago and mine changed from English to French...and I couldn't figure out why....Gonna stop off on the way home (as it is parked outside my usual office at the moment) and see if that solves it....
https://www.landyzone.co.uk/land-rover/bcu-est-devenu-français.340113/

You fecking genius.....

THIS, PEOPLE, THIS IS EXACTLY WHY WE ASK YOU TO CLOSE OUT A THREAD ONCE YOU HAVE FOUND A RESOLUTION - COS IT HELPS NUMPTYS LIKE ME FIND ANSWERS.....

The OP needs a ba-zillion likes for closing this thread!

Saint.V8 · Apr 16, 2019

knightrider said:
Hi guys just to give closure to this thread I have done some more digging and have got to the bottom of it. I upgraded my nav to the mk4 dvd version last summer and for some bizarre reason when turning off speed camera alerts it changes the language from English to French in the dash display only.

I put the speed camera alerts back on to see what the warning message was and it turned out it was just the headlight delay warning that comes on when turning lights off after removing keys to give an extra 20 seconds of lights.

Nice to know there was no bigger problem, thanks again to all who chipped in with help and advice

And just to prove it.....

Once again, cheers buddy!

knightrider · Apr 16, 2019

Cheers Saint, glad that I’ve been able to help you out for once after all the times you have helped me buddy!

biketeacherdave · Apr 16, 2019

Time to fix that display its pretty simple todo

Grrrrrr · Apr 17, 2019

Should have stuck with the P38 ...

wammers · Apr 17, 2019

New display needed and put some fuel in you tight git.

tomcat59alan · Apr 17, 2019

DanClarke said:
Sorry, don't understand why you don't/can't read your own Owners Manual or look it up in RAVE yourself.
Do you want me to pop round and push the button for you if its there?
View attachment 175177

He would have to type in his location Dan, oh the effort involved

L322 Warning/Error message on display when turning engine off help needed

Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Very

Member

Dyed-in-the-wool 100% RR Junkie

Dyed-in-the-wool 100% RR Junkie

Member

Well-Known Member

Technician, Bodgit & Scarper Ltd

No longer with us, RIP

Well-Known Member

Similar threads