Viscous Fan Spanner needed.

Hi guys,
I need to borrow a Viscous Fan Spanner and fan holding tool, I ordered one about a week ago but it still hasn't arrived, and the shop I bought it from won't tell me when I can expect to receive it. I just need to replace my water pump, I'm in stranded East London at the moment. I would be eternally grateful if someone could lend me theirs.

Cheers.

Is it for a disco 1?

Hi Brian,
No Its for a P38, 36mm I think.
Cheers

Halfruads do em a double sided one about £15 ish

Hi, Not really what I was asking, but thanks for your input. Don't really want to end up with 2 sets of tools I'm not going to use for years!!

I think it's useful. Go to halfrauds and send the other one back...

What's a "fan holding tool"? I just used my left hand while the spanner was in my right hand do take the fan off my Disco...and before I had the spanner I used a long screw driver and a hammer.

Richard Martin said:

What's a "fan holding tool"? I just used my left hand while the spanner was in my right hand do take the fan off my Disco...and before I had the spanner I used a long screw driver and a hammer.

Click to expand...

That's good enough ..

a long 1/2 ext bar on the nut corner then a sharpe tap with a hammer always works for me