vibration noise

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
J

jay572

New Member
Posts
100
Location
liss hampshire
hi have a disco 2 automatic get a funny sort of vibration/humming noise when revs are between 1000rpm and 1200 rpm even if it is in park or neutral.
has any one got any ideas?? also power steering box leaking cant afford a reckon or new one at mo dose power steering leak stop damage anything if not whats the best one to buy.....
 
Last edited:
could be a number of things. first things i would check is;

engine mounts
gearbox mounts
engine cover (can you move it around by hand?)
trans box weight (metal/rubber block between box and chassis rail near to handbrake drum, is known for the bolts to come loose)
 
Hi
I have the same noise at the same revs, its the engine mounts.
Crawl under the front of the car and look at the bottom of the engine mounts, there is a small hole. Get something to put through the hole untill it touches the rubber block inside. Mark it and then take it out and measure it, it should be 10mm i think. If the rubber is on the bottom of the mount as mine is the engine vibration will be buzzing through the chassis.
Hope this helps
Mark
 
Usually both engine mounts, I have also heard (dont know how true it is) that some of the after market ones still allow vibration noise through. The genuine ones arn`t much more so when i do mine it`s having genuine ones on.
Mark
 
jay572 said:
thanks for the replies i will try the engine mounts tomorrow, would it be just the one thats gone or normally more??
Click to expand...


You would normally do both engine mounts as they will have done the same work. Turners do LR ones for about £50+vat each.

Also considor doing the two gearbox mounts as well (they are much cheaper!!)
 
thanks for all the replies today thebiglad been a great help, it much appreciated, will also try the oil pressure switch tommorrow. also thankyou squizzel for the answer of the vibrations hope its that have certainly given me somewhere to start many thanks
 
squizzel said:
Usually both engine mounts, I have also heard (dont know how true it is) that some of the after market ones still allow vibration noise through. The genuine ones arn`t much more so when i do mine it`s having genuine ones on.
Mark
Click to expand...

It's true, fitted "OEM" ones to mine, made the "idling" vibe terrible, removed em, refitted old ones and sent em back......
 
You must log in or register to reply here.

Similar threads

C
Newbie Freelander 2 with a vibration and rubbing noise
Replies
7
Views
371
chubbygordito
C
H
Chasing down engine vibration/judder
Replies
6
Views
1K
Nodge68
Nodge68
H
Chasing down engine vibration/judder
Replies
2
Views
689
HACKCHILD
H
C
Noise from (possibly) LH front drive ... Freelander 2 SD4 XS
Replies
5
Views
502
chj
C
J
Discovery 2 PAS Problem (SOLVED)
Replies
11
Views
2K
JakeFrost
J
Back
Top