Dannysmith20002
New Member
- Posts
- 3
Evening all, new to land rovers, bought a fl td4 and just wondering if a L series VCU will fit? It’s from a 1999 going onto a 2006
VCU
- Thread starter Dannysmith20002
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
andyfreelandy
Well-Known Member
- Posts
- 5,587
- Location
- Devon
Yes, sure the V6 is the only different one.
Dannysmith20002
New Member
- Posts
- 3
Cheers pal, just wasn’t sure with them being different engines that’s all and my VCU don’t work properly
andyfreelandy
Well-Known Member
- Posts
- 5,587
- Location
- Devon
L series one will be well used. Check it before buying it might be worse than what is on there!
Dannysmith20002
New Member
- Posts
- 3
Accordingly its refurbished from bell engineering a year or two ago, getting pics sent tommorow
Alibro
Well-Known Member
- Posts
- 7,205
- Location
- Northern Ireland
If true it will be a good one but I'd check with the one wheel up test after it's installed.Accordingly its refurbished from bell engineering a year or two ago, getting pics sent tommorow
In fact you can do a quick unscientific test before fitting it. Put a large screwdriver in the knuckles either side and see how hard it is to turn. It should be difficult but possible.
