VCU Guard Pic...

SES88 · Jan 27, 2014

Does anybody have an image of the yellow VCU guard that somebody made? The one that was out of box section, pretty sure it was a member on here who made it...Doobreydog rings a bell maybe?

Done a search on Google (which usually brings everything up on LZ) and on the search button but can't find a pic of that one anywhere. The black angle bar one is no good to me

Cheers chaps

baptista · Jan 27, 2014

the only one I remember was on the Australian forum

bukko · Jan 27, 2014

Didn't RealBeale have one on his? Could be wrong.

JRNORWAY · Jan 27, 2014

I havent seen the yellow one. But i had this one on my computer. Not sure where i got it from.

Winu · Jan 27, 2014

Simon, you should know where to ask about pics of strange Freelander stuff

Here you got some from my link's archive

, Those are DD's idea's

teddywood1 · Jan 27, 2014

ok but I really can not see the point of it if you went over a rock it could dent it and push it into the vcu and stop you going any where

Kizzeh · Jan 27, 2014

Just another Anchor I think...each to there own though

Nodge68 · Jan 27, 2014

The problem I can see with that is the reduction in ground clearance!! The VCU isn't that fragile as to need that massive armour plated protection system. All I can imagine that doing is bending the floor should it hit something solid!! The rubber mounted VCU would likely move out the way should it hit a solid object.

SES88 · Jan 27, 2014

Its not for me, I've been asked for a price to make one, its just to work out what I need

Kizzeh · Jan 27, 2014

Kizzeh said:
Just another Anchor I think...each to there own though

I have also seen the yellow one. I think it was on here

SES88 · Jan 27, 2014

Kizzeh said:
I have also seen the yellow one. I think it was on here

I'm not losing my mind then!

Duncp73 · Jan 27, 2014

SES88 said:
I'm not losing my mind then!

I've seen it as well Si. I can't find any trace of it now though.

bukko · Jan 27, 2014

This is Doobreydog's:

VCU MK 2 Photos by doobreydog | Photobucket

Not box section though.

duncanpage4 · Jan 27, 2014

Think this is what you wanted

SES88 · Jan 27, 2014

duncanpage4 said:
Think this is what you wanted

It is indeed, Thank you very much

duncanpage4 · Jan 27, 2014

Does this mean there may be a chance to purchase these soon??!!

IndiTd4 · Jan 27, 2014

Can you not just do one that covers the complete underside,
then I would only need to get one item..

Please????

SES88 · Jan 27, 2014

duncanpage4 said:
Does this mean there may be a chance to purchase these soon??!!

You can purchase anything at any time if the price is right for you! I'd make them with a plate on the bottom that kicks up at the front to stop things going between the bits of box section.

Pm me with what youd expect to pay for one of these so I can gauge price

SES88 · Jan 27, 2014

IndiTd4 said:
Can you not just do one that covers the complete underside,
then I would only need to get one item..

Please????

Problem with that is the shape of the car, I nearly made something similar for a Disco 3 a while ago, a complete underbody skid tray from front to rear, but with the Disco, most things sit inside and above the chassis rails so dead easy to do!

RealBeale · Jan 27, 2014

bukko said:
Didn't RealBeale have one on his? Could be wrong.

Not me. Although I was met with hostility when questioning the design as being prone to getting branches etc jamming and causing more damage. Doesn't take a genious to see this will happen. Needs an enclosed design really.

VCU Guard Pic...

Well-Known Member

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Active Member

Attachments

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Similar threads