FlyingDutchman
Active Member
- Posts
- 181
- Location
- Cardiff
Ask the seller. If he can't tell, don't buy. There are plenty of suppliers who can.
V8 cut out now wont start, Started once and missfired cut out again
- Thread starter SnowmanV8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
I would but at 10pm he wouldn't answer
they are: due to immense weight of the discovery brakes of both the 115hp 2.5 300 tdi and 182hp 3.9 v8 are the same. The only difference is higher spec "es" models came with vented! That makes me wonder can I fit vented onto my disco? Not interested now but if I upgrade engine I will want to put after market disc's and pads on, knowing just how far I can go with my stopping power and disc width!
Last edited:
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
You can fit vented yes, just need vented spec calipers aswell.
They are no good for Offroad by the way as the vents fill with mud.
Classic Kev is another member who is excellent at diagnosing 14CUX faults, we can get this sorted if you are clear and concise with your information
They are no good for Offroad by the way as the vents fill with mud.
Classic Kev is another member who is excellent at diagnosing 14CUX faults, we can get this sorted if you are clear and concise with your information
SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
Picking up a multimeter tomorrow and testing temp sensor, Will start trying to diagnose the issue tomorrow!
Mr Noisy
Coming in your ears.
- Posts
- 10,146
- Location
- Altrincham, Cheshire
The link that fanatic posted is a HUGELY useful guide
Go through it from start to finish and you will know a lot more about your system
It doesn't mention MAF settings but they are available on here with a search!
Go through it from start to finish and you will know a lot more about your system
It doesn't mention MAF settings but they are available on here with a search!
SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
Yeah I'm reading through that! I can't believe this bloody thing, At least I will know what's done and what isn't
