Universal drive flange holding tool

payydg · Dec 17, 2017

http://fourby.co.uk/epages/950004277.sf/en_GB/?ObjectPath=/Shops/950004277/Products/LRT-51-003

Somewhat cheaper than the official tool

neilly · Dec 17, 2017

I like that.

They have put a nice bit of thought into that.

Cheers

payydg · Dec 17, 2017

They make a fair few of the specialist tools at a much more user friendly price. All Designed and made in the UK

neilly · Dec 17, 2017

payydg said:
They make a fair few of the specialist tools at a much more user friendly price. All Designed and made in the UK

Yes the owner of the company is on here. Nice Guy.

Plus you see their stuff on LRTV on youtube.

Cheers

payydg · Dec 17, 2017

LRTV is where is saw this!

Paul D · Dec 17, 2017

I like that .. might have saved me a fair amount of time. Might have to check them out.

I made my own, basically flat bars or plate, drilled and bolted with extra bits or cut-outs to go round corners if needed .. but I have a few, all slightly different ..

neilly · Dec 17, 2017

Paul D said:
I like that .. might have saved me a fair amount of time. Might have to check them out.

I made my own, basically flat bars or plate, drilled and bolted with extra bits or cut-outs to go round corners if needed .. but I have a few, all slightly different ..

I did the same, 3 pieces of flat stock, Plus it does help on tight Viscous fans to hold the pulley in place.

Cheers

Universal drive flange holding tool

payydg

Well-Known Member

neilly

Well-Known Member

payydg

Well-Known Member

neilly

Well-Known Member

payydg

Well-Known Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

neilly

Well-Known Member

Similar threads