payydg
Well-Known Member
- Posts
- 3,903
- Location
- Aberdeenshire
http://fourby.co.uk/epages/950004277.sf/en_GB/?ObjectPath=/Shops/950004277/Products/LRT-51-003
Somewhat cheaper than the official tool
Somewhat cheaper than the official tool
Universal drive flange holding tool
- Thread starter payydg
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
I like that.
They have put a nice bit of thought into that.
Cheers
They have put a nice bit of thought into that.
Cheers
payydg
Well-Known Member
- Posts
- 3,903
- Location
- Aberdeenshire
They make a fair few of the specialist tools at a much more user friendly price. All Designed and made in the UK
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Yes the owner of the company is on here. Nice Guy.
Plus you see their stuff on LRTV on youtube.
Cheers
payydg
Well-Known Member
- Posts
- 3,903
- Location
- Aberdeenshire
LRTV is where is saw this!
- Posts
- 14,902
- Location
- Doncaster
I like that .. might have saved me a fair amount of time. Might have to check them out.
I made my own, basically flat bars or plate, drilled and bolted with extra bits or cut-outs to go round corners if needed .. but I have a few, all slightly different ..
I made my own, basically flat bars or plate, drilled and bolted with extra bits or cut-outs to go round corners if needed .. but I have a few, all slightly different ..
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
I like that .. might have saved me a fair amount of time. Might have to check them out.
I made my own, basically flat bars or plate, drilled and bolted with extra bits or cut-outs to go round corners if needed .. but I have a few, all slightly different ..
I did the same, 3 pieces of flat stock, Plus it does help on tight Viscous fans to hold the pulley in place.
Cheers
Last edited:
