tyre (over)inflation

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

hebdenwill

Active Member
Posts
116
Location
Hebden Bridge, West Yorkshire
hi everyone,

i recently topped up my tyres to the reccommended PSI but they look almost flat. how much further can i inflate them, and does having almost flat tyres provide much benefit other than giving more grip anyway?

any answers would be much appreciated, ive looked around but can't find much online

P.S mine's a 90 swb
 
Well as its Sunday I've given my psychic powers a day off and as such I can't tell what size your tyres are. Ask me again tommorow, ill even be in work then and ill have my crystal ball to hand as well.
 
i use a tyre pressure gauge (old style one like a pen) and the gauge on the compressor but i think that's a bit inaccurate. 1.9 bar front 2.4 bar rear

rear tyres are kingpin pathfinder remoulds and fronts are toyo "open country"
 
I've Hankook 33x12.5r15 Muds and 35psi seems to work fine on them.

Be aware that some tyres can tend to balloon up when driving on the motorway too at high speeds for long distances so don't inflate them too much.
 
I've Hankook 33x12.5r15 Muds and around 33 psi seems to work fine on them.

Be aware that some tyres can tend to balloon up when driving on the motorway too at high speeds for long distances so don't inflate them too much.
 
This is from the landy workshop manual
ImageUploadedByTapatalk1376302318.226534.jpg
 
Doesn't matter what tyres I have on, they are always run at 28psi front and 32psi rear ;)

Never had any problems at all and they last a bit longer than running with higher pressures :D
 
I'm running 255/55/16 and got them at 28 front 38 rear. That's the pressures that kept coming up when I'd searched though I'm not overly happy with it if I'm honest
 
Back
Top