two lock probs are they related?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

sandyt

Well-Known Member
Posts
1,615
Location
Wraysbury Nr Heathrow
Help please I have searched but cant find a solution so here we go passenger front door wont lock on central locking or key fob but if I press the button down it will lock and unlock all doors -from reading on here sounds like the motor has gone but at the same time the drivers front door is doing the opposite it is locking and unlocking on the key fob but when I press down the button it does nothing both these faults arrived this morning after taking the nearside front doorcard off and re riveting the window mechanism have checked all wiring and all seems fine any ideas???
 
right have stripped down he lock all seems ok however there is a brown cog on a spindle which I assume is the electric motor I could not get this to activate also it seemed unattached in that no physical connection - does this operate by creating a magnetic field ? anyway it locks everything except the front near side door on the remote if I push the button down on the door it locks all so my guess is the motor is fooked - it is showing an alarm fault which I am putting down to the lock also the interior light does not go out automatically so with all this is it the 0utstation? as ever any help much appreciated
 
It sounds very much like your locking motor. These can't be replaced on their own. You have to replace the whole lock assembly - quite expensive at around £120 or so unless you get one from a scrapper - you could try Emmotts of Colne - details:-
Emmotts of Colne
The Foundry
Unit 1
Riverside Mill
Greenfield Road
Colne
Lancashire
BB8 9PE
01292 859468
07721 414813
07785 240021
ask for Joe

Are you sure your drivers door problem only started yesterday? How often do you use the lock button on the drivers door? If it's locking OK on the fob (and the key??), it's more than likely just the linkage that's come adrift.
 
did you strip the whole lock mech down, taking the 6 or so small screws out? then you have to plug it in to the loom and fiddle with the motor type thing, they seem to stck very easily!!

i revived mine this way!!


try it for what its worth!!
 
Update did as you said Gav and the motor runs but ony if started in the same place so guess the actuator is gone so will have to replace thanks again at least I know its gone and the motor is the prob
 
You must log in or register to reply here.

Similar threads

Flossie
P38A CDL issue
2
Replies
30
Views
588
cornishboater
cornishboater
Maat
P38A Door lock not working
Replies
3
Views
829
Maat
Maat
M
Central lock
2 3 4
Replies
74
Views
2K
mikkre
M
I
Re-pairing keys after BCU replacement
Replies
1
Views
393
Blob
Blob
L
Steering lock / alarm problem
Replies
1
Views
526
bankz5152
bankz5152
Back
Top