P38A Turbo out, exhaust manifold off - broken & missing bolts

Hi all,
I finally got the turbo off to clean & check it and the waste gate. Waste gate actuator seemed stuck but after some persuasion with wd40 and a bit of time it's now moving. Actuator seems ok now so I'm going to refit unless someone has advice otherwise.

Does anyone have either the part numbers & supplier or can I buy off you the following:
1 x r clip for wastegate & turbo pivot (mangled)
1 x exhaust manifold hex head bolt (missing)
3 x turbo / manifold mounting bolts - (1 sheared and as I needed to remove with my rattle gun I want new ones)
cheers,
Hoppy

I had to buy Turbo bolts from main dealer and isnt the maniofld studded ?

Thanks Ovalandrover, on mine I had 3 x multi pointed bolts through the manifold into the turbo. Also my exhaust manifold to head has allen key bolts not studs. Maybe a Friday pm special!
cheers,
Hoppy

Can't help but remember lots of photos for when we have to do the same!

Part number for turbo bolts is PYP100650L. Nothing for clip you will have to improvise. Manifold is better studded, but if you replace the Allen bolt make sure it is HT and not an Halfrauds special.

Wammers thanks mate. Studs would definitely be easier that's for sure!

Grrr I'll take pics before I reassemble - nice hi res ones

Wammers are there part numbers for the studs mate please? If so I'll fit those as I can see fitting the hex bolts is going to be a marathon swearathon

Nice to see someone local here, I'm in Northwich.

Mukiwa said:

Wammers are there part numbers for the studs mate please? If so I'll fit those as I can see fitting the hex bolts is going to be a marathon swearathon

Click to expand...

Studs are 8510231 14 off. Nut to suit 8510235 14 off. Look around for best prices.

SpanishTony said:

Nice to see someone local here, I'm in Northwich.

Click to expand...

Hi Tony,

Nice to see someone local as well, I thought the nearest was Wammers If you need any help and I'm available give me a shout - not sure if I'm any good though hahahaha

wammers said:

Studs are 8510231 14 off. Nut to suit 8510235 14 off. Look around for best prices.

Click to expand...

Cheers Wammers, as always!

Mukiwa said:

Hi Tony,

Nice to see someone local as well, I thought the nearest was Wammers If you need any help and I'm available give me a shout - not sure if I'm any good though hahahaha

Click to expand...

I'm closer.

tomcat59alan said:

I'm closer.

Click to expand...

Yeah you are that is a good reason for him not to let his wife out without an escort.

wammers said:

Yeah you are that is a good reason for him not to let his wife out without an escort.

Click to expand...

Your not doing escorts again are you Tony, thought you had given that up after the last lot of trouble.

tomcat59alan said:

I'm closer.

Click to expand...

Where abouts?

Mukiwa said:

Where abouts?

Click to expand...

Emmm, Wirral.

Ah yes, I fell for the not reading the location box trick, again! hahaha